Hub/Rotor or Slip-On Rotor for 2018 Cedar Creek 38EL to Convert to Disc Brakes
Question:
I am considering a disc brake upgrade for my 2018 Cedar Creek 38EL with tandem Dexter 8k lb axles. Trying to decide whether bolt on rotors or hub/rotors would be best. I am ok with a little higher budget if it gives me a much better solution. Also considering the
asked by: Michael D
Expert Reply:
The slip on kits like the part # K71-635-92 that fit your Dexter 8k axles have the benefit of rotors that are easy to replace going forward since you don't have to replace the hub at same time. Like with this kit you could replace rotors in future with part # K71-631-00.
Or the hub/rotor kits like the part # K2HR89DD will work great too but replace rotors will require new hubs too. It might be best to look at how long you plan to keep the camper and go with which makes more sense. If you want to keep the trailer awhile I would go with slip-ons.
Products Referenced in This Question
Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Dacromet - 8,000-lb Dexter
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 8000 lbs
- Brake Assembly
- 8 on 6-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Replacement 13" Rotor for Dexter Disc Brakes - 8 on 6-1/2 - E-Coat - 8,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- 8000 lbs
- Rotors
- Dexter
more information >
Product Page this Question was Asked From
Dexter Disc Brake Kit - 12-1/4" Hub/Rotor - Grease - 8 on 6-1/2 - E-Coat - 8,000 lbs
- Trailer Brakes
- Disc Brakes
- Standard Grade
- 8 on 6-1/2 Inch
- Hub and Rotor
- 5/8 Inch Studs
- 8000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Dexter Trailer Hub - Nev-R-Lube - 8 on 6-1/2 - E-Coat - 5/8" Bolts - 8,000 lbs
- Shop: Dexter Disc Brake Kit - 12-1/4" Hub/Rotor - Grease - 8 on 6-1/2 - E-Coat - 8,000 lbs
- Shop: Kodiak 13" Rotor - 8 on 6-1/2 - Dacromet - 5/8" Bolts - 7,200 lbs to 8,000 lbs
- Shop: Dexter Trailer Hub and Drum for 8,000-lb E-Z Lube Axles - 12-1/4" Diameter - 8 on 6-1/2
- Shop: Easy Grease Trailer Hub and Drum Assembly for 8K Axles - 12-1/4" Diameter - 8 on 6-1/2
- Shop: Dexter Trailer Hub and Drum Assembly for 8,000-lb E-Z Lube Axles - 12-1/4" - 8 on 6-1/2
- Q&A: Replacement Dexter Nev-R-Lube 8K Drum with 5/8 Inch Studs
- Shop: Replacement Trailer Hub Wheel Stud, Drive-In, 5/8" x 3-1/8" (Qty 4)
- Search Results: hubs
- Search Results: idler hub
- Video: Kodiak Trailer Brakes KR13858D Review
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 008-402-91 Review
- Search Results: rotor hub 133 8 10
- Search Results: 44649
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Brake Controller
- Search Results: 68149
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?
- Search Results: 25580
- Shop: Fifth Wheel Hitch
- Search Results: dust caps
- Shop: Brake Controller
on Trailer Brakes
