Does Track Nut of Batwing and Foxwing Hardware Kit # RR33101 Fit Yakima Outpost

Question

Question:

Will these fit in the T slots of the Yakima Outpost Rack as well as the short bars?

asked by: Dean B

0

Expert Reply:

Yes, the track nuts of the Batwing and Foxwing Hardware Kit for Rhino-Rack Heavy-Duty Crossbars # RR33101 do fit the Yakima Outpost crossbar top channels.

expert reply by: Jameson C

0

Answer 1

On the Thule AeroBlade crossbars the upper part of the T-slot is 1/2 inch wide and the lower part is 3/4 inches wide. T-bolt #853-0782 could work. The threaded part is 2 inches long and has a diameter of 8 millimeters. 3-wing knob #753-0776 is an…

view full answer...

Answer 2

We do offer replacement nut plates in a hardware bag, part #Y83FR. Yakima doesn't offer the nut plates separately.

view full answer...

Answer 3

The Yakima Replacement Anchor Plate Style-A, Part #Y8810074, comes as a set of 8 plates that measure 3/4-inch x 7/8-inch. The centered threaded hole measures 0.2 inches (or 5.1 millimeters) in diameter. Please refer to the photo provided. The…

view full answer...

Answer 4

Yes the Rhino Rack Hi Lift Jack Holder part #RR43101 that you referenced would fit the slots of your Yakima Outpost HD Rack. Thankfully the roof rack manufacturers all generally use the same channel dimensions so their accessories can fit each…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 12

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Does Track Nut of Batwing and Foxwing Hardware Kit # RR33101 Fit Yakima Outpost

Product Page this Question was Asked From

Continue Researching