Are The etrailer.com And MORryde Part Numbers The same For Each Unit Or Different

Question

Question:

MR48RR - is this the same as Moryde # STP-207?

asked by: Erik A

1

Helpful Expert Reply:

Good question, lets check it out:

**MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways - 3 Steps # MR48RR.

The part you are looking at is indeed the same thing, STP-207 is the MORryde part number and # MR48RR is the etrailer part number for the same item.

expert reply by: David B

1

Answer 1

The correct fit for a manual fold down step with a 24" entry width and 34" entry height is the MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways - 3 Steps #MR48RR.

view full answer...

Answer 2

I can tell you how to determine if the Lippert steps you asked about will fit your trailer (it's really easy, I promise), though we don't have any way of knowing what steps that will fit a model year 2000 pop-up trailer. All you need to do os…

view full answer...

Answer 3

To find the correct replacement steps for your trailer you are going to need to measure where your bolt hole centers are and ensure you have enough room for the mounting base to fit. For example, the Lippert #LC432687 has bolt hole centers that are…

view full answer...

Answer 4

The SolidStep Manual Fold-Down Steps for 29" to 36" Wide RV Door Frames, #LC791575 requires that the door open to at least 90 degrees for the steps to deploy. This set of steps is for an entry height of 35" - 44" and a doorway…

view full answer...

Answer 5

The standard clearance requirement for the MORryde StepAbove RV steps like part #MR88RR is 3/8 of an inch which is the same for the #MR28RR.

view full answer...

Answer 6

The biggest differences between the MORryde StepAbove RV Steps #MR48RR and Lippert SolidStep RV Steps #LC791572 is that the MORryde is made in the USA and it has pins on the hinge plate so you can easily disconnect the steps and gain access to the…

view full answer...

Answer 7

Based on the door dimensions you mentioned for your 2006 Keystone Cougar the MORryde StepAbove part #MR98RR that you referenced is correct fit and would work really great.

view full answer...

Answer 8

Verify the distance from the threshold to the front of the StepAbove hinge plate it should be 15/16". There should also be 1/8" clearance between the inside lip on the door jamb and the outside edge of the step on each side. Check to make…

view full answer...

Answer 9

You are right on. The 8" rise/drop on the MORryde StepAbove Fold-Down Steps #MR98RR is the height between the steps. The #MR48RR you were looking at has a 9" rise/drop meaning the distance between the steps is 9". The #MR98RR is…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...