Can You Reverse with Reese StraitLine Weight Distribution System Spring Bars Connected
Question:
I have a 1995 Award Classic 30 travel trailer , 4500 lbs. dry weight, 500 lbs. tongue weight. The tow vehicle I used for years was a Suburban, It finally wore out and had to be replaced. I used a pull rite hitch which towed great but everything else about I HATED, the hitching, the backing, and especially the wide swing out I had to make because the pivot point was moved forward under the vehicle and not on the bumper as a regular hitch. I also had to remove the bars in a lot of camp grounds to back in, which I also hated. Now I have purchased a 2008 Tundra to pull my Award with and I am looking for a hitch, I have started my research , reading about the strait line which sounded great until now, when I read that it should be unhooked when backing, reminds me of the pullrite.. What I am after is a hitch with no sway, no push pull on the expressway when a semi passes , but I want easy cornering,and backing without unhitching until I back into the campsite. I want a Reese because of the reputation and quality, safety has to come first. Which hitch do you recommend for my needs?
asked by: John P
Expert Reply:
With a dual-cam sway control system like the Strait-Line Weight Distribution System # RP66084, you will have more freedom in terms of backing up than you would with a friction sway control bar. However, if you are going to be making tight turns and maneuvers while backing up, it is a good idea to disconnect the dual-cam sway control to avoid any potential issues. I have included a link to our FAQ article on weight distribution and sway control for you.
When picking out a weight distribution system the most important factor to consider is the loaded tongue weight of the setup when you are loaded and ready to go. This also includes the weight of any cargo behind the rear axle of the tow vehicle. I would recommend you determine this figure before you purchase a system. Most likely the # RP66084 would work for you but you will still need want to verify your tongue weight. I attached an FAQ article on how to determine this for you to check out.
Product Page this Question was Asked From
Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Determining Trailer Tongue Weight
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Recommended TorkLift Hitch and Extension for a 2024 Chevy Silverado 3500
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Can the TorkLift Everest Weight Distribution System Be Used w/ a SuperTruss Extension?
- Q&A: Is there a Longer Weight Distribution Shank for a B&W Continuum?
- Q&A: What Does Underslung Coupler Look Like for Picking Out B and W Continuum Weight Distribution
- Q&A: Recommended Weight Distribution System for a 6,800 lbs 2019 Lance 2465 Travel Trailer
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Q&A: Comparing the Equal-i-zer Hitch Vs The Reese Wieght Distribution Hitch With Dual Cam Sway Control
- Q&A: Can Strait Line Weight Distribution be Used with Feather Lite Trailer