Can I Use the 84" Long x 56" Wide # RR75TB on My Leer Camper Shell with Thule Tracks?

Question

Question:

I have a ram 2500 long bed with a leer shell and 72” thule tracks. The rhino website suggests the 72” x 56” platform w/ the backbone. Can I use the 84” x 56” platform? Thanks!

asked by: Ben C

0

Expert Reply:

Yes. You can still use the Rhino-Rack Pioneer Platform - 84" Long x 56" Wide # RR75TB on your Leer camper shell with 72" Thule tracks. As a complete system, you need the Backbone # RR24AT.

It is important to note that using this backbone and platform size voids the Rhino-Rack warranty.

expert reply by: Bob C

0

Answer 1

From the looks of your order, you purchased the Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 59" #Y02-490B-NT. For your ARE MX topper to use the feet from that system, Rhino-Rack recommends the Rhino-Rack Pioneer…

view full answer...

Answer 2

The biggest Pioneer Platform rack you can fit on your Rhino Rack Vortex crossbars is the part #RR42115BF which comes with universal mounting hardware. There isn't a hardware kit that allows the larger #RR75TB to fit your current bars.

view full answer...

Answer 3

Yes!! You just need to get the right kit. All you need is this Pioneer Platform Kit #RR42115BF and it will clamp around to your factory crossbars! Check out my video to see how it installs!

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 7

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 11

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 12

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...