Latch Repair Kit for Bulldog Cast Head Coupler 4420000317

Question

Question:

a replacement wedge and latch availble for this hitch

asked by: Ray D

0

Expert Reply:

I spoke with my contact at Bulldog and he confirmed that for coupler # BD4420000317 you would use latch repair kit # F670801. This repair kit actually fits several makes and models of couplers from Fulton and Bulldog.

expert reply by: Michael H

0

Answer 1

The difference in the Repair Kit for Fulton A-Frame Coupler 2-5/16" Ball with Wedge-Latch part #F640801 and the Repair Kit Fulton Wedge-Latch Cast Head Coupler part #F670801 is what couplers they fit. Part number F640801 is designed for use with…

view full answer...

Answer 2

We don't have a confirmed fit for your Fulton Coupler for a repair kit. The Latch Repair Kit #F670801 is the closest option we have and hasn't been tested with straight couplers so I can't confirm it will work. I recommend instead for a…

view full answer...

Answer 3

In order to upgrade from a 6 on 5-1/2" bolt pattern to a 8 on 6-1/2" bolt pattern on a Dexter 6K Axle you'll need the Dexter Trailer Hub and Drum Assembly part #42866UC3-EZ. The Dexter 5,200 lb - 7,000 lb axles all have the same size…

view full answer...

Answer 4

The Dexter Nev-R-Adjust electric trailer brakes can be manually adjusted. There are a couple teeth of the adjustment wheel that are exposed just under the lever that you referenced. I have attached a photo showing the teeth. You will likely need a…

view full answer...

Answer 5

Most people prefer to completely replace the brake assembly instead of replacing just the brake shoe because the cost of the brake shoes is about 3/4 the cost of completely replacing the assembly and you'll typically have quite a hard time…

view full answer...

Answer 6

I have included a link to a video on adjusting self-adjusting brakes. Basically there is a device on the adjustment wheel on these brakes that prevents the shoes from adjusting back inward. You have to sort of move that out of the way to be able to…

view full answer...

Answer 7

The Disc Brake kit part #K2HR526D should work well on the 6k Dexter axle you have as it was designed to fit it. You can verify if you would like though by removing the bearings from the hubs of your trailer and making sure they are 25580 for inner…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Latch Repair Kit for Bulldog Cast Head Coupler 4420000317

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching