Measurements of TrailAir 5th Wheel King Pin Box Rated for 21,000 Pounds # LC158778
Question:
I have a Lippert 1621 extended hitch pin box on a 2012 Heartland Big Horn. I would like to replace it with a Trail Air box. I have a Pace Edwards roll top cover on my truck so I need to check the installed length measurement of the Trail Air box to make sure I have proper space between the bed rails for turning. I need the measurement from the center of the king pin to either set of bolt holes. Thanks for your help!
asked by: Joe H
Expert Reply:
I went out to our warehouse and measured the TrailAir Ride 5th Wheel King Pin box # LC158778, and the distance from the center of the kingpin to the center of the first hole is 19-1/2 inches and the holes are 7-7/8 inches apart, center to center. This makes the second set of bolt holes 27-3/8 inches from the center of the king pin.
I have confirmed with my technical contact at TrailAir and you will be using the existing hardware that is already on your Lippert 1621 pin box and this replacement pin box has compatible holes for this hardware. There is no hardware included with the pin box.
This pin box is intended to mount and be dimensionally the same as your existing Lippert 1621 pin box, so if you have hauled your 5th wheel trailer with your truck with the roll top rails installed the replacement Ultra-Fab Trail Air Ride will not interfere with the rails.
I have included a photo showing these dimensions for your reference.
Product Page this Question was Asked From
Curt Air Ride 5th Wheel Pin Box - Lippert 1621 & 1621HD - 21,000 lbs
- Fifth Wheel King Pin
- Upgraded Pin Box
- Absorbs Road Shock and Reduces Chucking
- 21000 lbs GTW
- Fixed Turret
- Lippert 1621HD
- Lippert
more information >
Continue Researching
- Shop: Curt Air Ride 5th Wheel Pin Box - Lippert 1621 & 1621HD - 21,000 lbs
- Shop: MORryde Cushioned 5th Wheel Pin Box for 14K to 18K Trailers w/ Lippert 1621 and 1621HD
- Shop: MORryde Cushioned 5th Wheel Pin Box for 18K to 21K Trailers w/ Lippert Rhino
- Shop: Trailair Rota-Flex 5th Wheel Pin Box - Lippert 1621 or 1621HD - 18,000 lbs
- Shop: Lippert 1621HD 5th Wheel Pin Box - 18,000 lbs
- Q&A: Which MORryde Cushioned Pin Box Fits Rockwood Signature Ultra Lite Fifth Wheel
- Q&A: Replacement For Lippert 1621 Pin Box For 16,000 lb Trailer
- Q&A: What are the Dimensions of the Trailair Rota-Flex Pin Box # LC328330
- Q&A: Trailair Flex Air Pin Box Clearance From Tailgate And Bed Rails Of A 2017 Chevy Silverado 2500
- Q&A: Can B&W Companion 5th Wheel Hitch Be Used with Reese Sidewinder
- Q&A: Determining Pin Box Make and Model to Choose Correct Replacement Pin Box
- Q&A: Is the Lippert 1621 an Extended Pin Box
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Shop: Lippert 1716 5th Wheel Pin Box - 15,500 lbs
- Shop: Curt Flex Air 5th Wheel Pin Box - Lippert 1621 - 21,000 lbs
- Search Results: rp61422
- Search Results: lippert 1621
- Shop: Tailgate
- Shop: RV Jack Pads
- Shop: Suspension Enhancement
- Shop: Trailer Hitch
- Shop: RV Camera
- Shop: Truck Bed Tailgate Assist
- Video: Review of Furrion RV Wiring - 50 Amp Power Inlet - F52INSBS
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Shop: Fifth Wheel Hitch
- Video: Review of Lippert Fifth Wheel King Pin - Upgraded Pin Box - LC158778
- Search Results: trailer wheels center caps
- Search Results: pin box
- Search Results: gen~y hitch