Will Brophy Camper Tie Downs # HSSF Fit 2010 Toyota Tundra with Spray-In Bed Liner

Question:

Will the Brophy #HSSF work with my 2010 Toyota Tundra with 6.5foot bed and spray in bed liner?

asked by: MIke

Expert Reply:

My contact at Brophy advises that they have not done a test fit of their Camper Tie Down # HSSF on your 2010 Toyota Tundra. However, the key requirement for this product to properly fit your truck side rails is that there must be at least 2 inches of horizontal space underneath the lip of the bed rail.

If you refer to the linked installation instructions you will see a cross-section diagram illustrating how the HSSF clamps around the bed rail. The 2 inches of space required is for fitting the clamp plate.
I have also included a series of photos showing how the parts of this system attach to the side rail.

Your spray-in liner is compatible with this product since it will not block access to the underside of the bed rail like a slide-in plastic liner.

If needed you may want to consider the matching Tie Down Hardware Kit, part # TDHP, which includes turn buckles, S-hooks and chains. I have linked videos for both of these products.

expert reply by: Adam R