Option to Replace 3,500 lb Axle if None Have Right Measurements
Question:
Do you have D35 dexter axle with a 70inch spring seat width and a beam width of 85.13 inch width?
asked by: Ray K
Expert Reply:
There is not a Dexter axle with those measurements, so the only option we can offer is an axle-less system from Timbren. These are are simply bolted or welded so you do not have to worry about finding an axle that meets any specific measurements, and for a 3,500 lb axle you can use the following:
- Timbren Heavy-Duty Axle-Less Trailer Suspension - 2" Lift Spindle - Standard Tires - 3,500 lbs # TASR35HDS07
The # TASR35HDS07 also give you an improved ride compared to a traditional through-axle. The reason for that is the Timbrens aren't connected by an axle beam, so they work independently, meaning if there is a bump on one side of the road it won't rattle your entire trailer. The system also has progressive springs built in which are shock absorbers that allow a much smoother, more comfortable ride than the leaf springs found on standard axles.
Then for hubs, the correct fit for the spindle on this Timbren system is the Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K.
Products Referenced in This Question
Timbren Axle-Less Trailer Suspension - Heavy Duty - 2" Lift - 5 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 2 Inch
- Timbren
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - 2" Lift - 5 Bolt Flange - 3,500 lbs
- Shop: Front Runner Propane Tank Holder - Side or Rear Mount
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Search Results: timbren 3500
- Shop: Lock N Roll Articulating Trailer Hitch for 2" Receivers - Vehicle Side - 11,000 lbs
- Shop: Vehicle Cargo Control
- Search Results: vent
- Video: MaxxAir Mini Deluxe Trailer Roof Vent with 12V Fan Review and Installation
- Shop: Single Axle Jeep Style Trailer Fender - Cold Rolled Steel - 8" to 12" Wheels - Qty 1
- Shop: MaxxFan Deluxe Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke
- Shop: MaxxFan Mini Plus Manual RV Roof Vent w/ 12V Fan - LED Light - Black
- Search Results: timbren
- Search Results: 500931pr
- Search Results: 6x135 hub
- Q&A: Trailer Build With Timbren & Dexter Components
- Q&A: Can etrailer.com Electric Trailer Brake Kit # AKEBRK-6 Be Used with 17 or 18 Inch Wheels
- Search Results: propane tank holder
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Q&A: Is the Ark Off-Road Coupler Better than The Lock N Roll Coupler?
- Q&A: Factory 7-Way Wiring Color Code and Replacement Harness for 2018 Ford F-150
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Brakes for a 5th Wheel Trailer with 5.2K Lippert Axles
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Article: Trailer Tire Sizing
- Q&A: Availability Of Hub/Drum Kit With Brakes And Hardware Similar To Part BPH1206EPR
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide