Replacement Bracket/Hardware Kit for Aries AA3048315 ActionTrac Motorized Running Boards

Question

Question:

I have the original running boards for a 2021 GMC 2500HD, had to replace mine with new because of an accident on one side. Can I purchase just the hardware kit brackets, wiring harness, controller, etc.? If so, please provide me with a link.

asked by: Mark J

0

Expert Reply:

The correct mounting bracket kit for the Aries # AA3048315 ActionTrac motorized running boards is part # AA3025103. The mounting bracket kit includes all the bracketry, wiring, magnetic sensors, control box and hardware needed to install the ActionTrac motorized running boards on your 2021 GMC Sierra 2500 Crew Cab.

expert reply by: Mike L

0

Jerry

4/13/2024

Can I purches just 2 replacement brackets?

Reply

Mike L.

4/18/2024

@Jerry We checked with Aries for you, and found that unfortunately the brackets aren't available separately. They must be purchased in the # AA3025103 kit. We sure wish we had better news for you!

Reply

Answer 1

According to Aries, the #AA3025179 isn't a fit for the 2021 GMC Sierra 2500, the only GM truck it will fit is the Colorado/Canyon, not a full sized GM truck. We list the #AA3048315 you mentioned as a fit for the 2021 GMC Sierra SLT 2500 HD crew…

view full answer...

Answer 2

The Aries ActionTrac Motorized Running Boards with Custom Installation Kit part #AA3048324 is the correct fit for the 2016 Ford F-350 crew cab. The price is listed on the product page if you click on the part number link above. When the step is not…

view full answer...

Answer 3

Yes, the Brophy camper tie downs like the #HSAB can be used with bed rail covers. If you check out the picture I attached you can see a set installed on a bed rail with plastic covers.

view full answer...

Answer 4

I do have a way that will allow you to determine if the Brophy Clamp On Camper Tie-Downs part #HSAB will work for you but I spoke to my contact at Brophy and they do not list a weight capacity for them. As long as you are within the payload rating of…

view full answer...

Answer 5

I have a solution for you, but you won't be able to use stake pocket mounted tie downs on the 2014 Ford F-250 or F-350 because of the double walled stake pockets. However, you can use clamp on tie downs like the Brophy Clamp On Camper Tie-Downs -…

view full answer...

Answer 6

There is no weight capacity rating on the camper tie downs #HSAB and they will work for any camper size that is properly sized for your truck. The weight capacity will be on the Brophy Camper Tie Down Hardware Package, part #TDHP that is used to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit…

view full answer...

Answer 12

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Replacement Bracket/Hardware Kit for Aries AA3048315 ActionTrac Motorized Running Boards

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching