Furrion Replacement Glass Oven Door for FSRE17SA-BL

Question

Question:

My model number is FSRE17SA-BL which isnt exactly what the desription mentions. Will this work? Thanks

asked by: John W

0

Expert Reply:

Yes, the # 715326 is the correct replacement for the part FSRE17SA-BL you referenced.

expert reply by: Jameson C

0

Answer 1

The Replacement Glass Oven Door for Furrion 2-in-1 Range Oven #715326 for the Furrion 2-in-1 Range Oven with Glass Cover FSRE17SABL, which is no longer available is actually slightly different than the: -Replacement Stainless Steel Oven Door for…

view full answer...

Answer 2

We were able to get the dimensions for you of the replacement door you asked about: - Replacement Glass Oven Door for Furrion 2-in-1 Range Oven - Black #715326. This door measures 21-3/8” wide x 11-3/4” tall by 1-1/4” thick. I have added a cut out…

view full answer...

Answer 3

Yes the stainless #FR52FR is the same as the black part #715326 so they are interchangeable.

view full answer...

Answer 4

The part you referenced has been replaced by the Replacement Glass Oven Door for Furrion 2-in-1 Range Oven - Black. The manufacturer part number is 405237ET but we kept the original part #715326. This replaces more than the gasket it is the entire…

view full answer...

Answer 5

We do have replacement Furrion oven doors available. If you have the 17 inch tall oven door you'd need the part #715326 for black, part #FR52FR for stainless steel, or part #FR79ZR for 21 inch stainless steel, or part #FR66NR for 21 inch black.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Furrion Replacement Glass Oven Door for FSRE17SA-BL

Product Page this Question was Asked From

Continue Researching