Can Rotary Dimmer Switch # 37215235 Dim LED Lights

Question

Question:

Will this operate LEDs?

asked by: William D

0

Expert Reply:

If the LED lights of your RV are dimmable yes, the Rotary Dimmer Switch # 37215235 will work to dim them.

expert reply by: Jameson C

0

Answer 1

The Rotary Dimmer Switch #37215235 is 3-9/16" tall, and 2-3/16" wide. The cutout section is 2-9/16" tall and 1-3/4" wide. The red wire is for connecting to your 12 volt positive power source while the white wire leads to the…

view full answer...

Answer 2

The Rotary Dimmer Switch #37215235 is the only one in that style we have, but we also carry some other options which you can see linked below. The third wire on your current switch will be for the ground, and from my understanding JR Products is…

view full answer...

Answer 3

Yes, the Gustafson RV LED Sidewall Light w/ Button #277-000466 is compatible with a dimmer switch as long as you wire it to one compatible with LED light fixtures like the #37205-12315 or #37215225.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Can Rotary Dimmer Switch # 37215235 Dim LED Lights

Product Page this Question was Asked From

Continue Researching