2021 Chevy Silverado 1500 Replacement Retrax XR Side Rails for 5-3/4 Foot Bed

Question

Question:

I have a powered hard cover retrax pro just wanted to see the Diferencie between side rails RTT-82383 and RTX39F ..what can I use I have a 2021 Chevrolet Silverado 5 3/4’ bed Thanks !!

asked by: Ariel C

0

Expert Reply:

The difference between the XR Rails # RTT-82383 and # RTX39FR really boils down to what the correct fitment is for your truck. Since your 2021 Chevy Silverado 1500 has the 5-3/4' bed you need the replacement XR Rails # RTX39FR which is compatible with both the PowertraxPRO XR Hard Tonneau Cover # RTX53FR and the PowertraxONE XR Hard Tonneau Cover # RTX73YR.

expert reply by: Jon G

0

Answer 1

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 2

Hey Chad, so I'd actually recommend a mid size ladder rack like the Yakima OutPost HD Overland Truck Bed Rack #Y01152-58. This is by far going to be your best bet if you don't want to trailer your kayaks. These bars have a 500 lb weight…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 5

Hey Chris, Because the Thule TracRac TracONE Truck Bed Ladder Rack #TH27000XTB clamps to the lip of the bedrails it won't be compatible with any tonneau cover. You would need Thule's stake pocket mounted version the TracRac SR #TH43002XT-508…

view full answer...

Answer 6

The Air Lift LoadLifter 5000 Ultimate Plus kits like the part #AL88288 that come with the braided lines actually also come with the nylon air tubing that runs to the inflation valve still which would be where you'd install a union tee like the…

view full answer...

Answer 7

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 8

For a ladder rack that fits your 2023 GMC Sierra 1500 and would fit with your Rev industries tonneau you would want the Adarac Pro Series part #A45DJ if you have a 6-1/2 foot bed or the part #A76WG for if you have a 5-3/4 foot bed. These rack install…

view full answer...

Answer 9

Hi Ruben; thanks for the question, and while there is one rack for your 2023 Ford F-150 with a 6-1/2' bed compatible with the Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover #PE66UV, it does not have sides, and is part #TX84NV.…

view full answer...

Answer 10

Yes, to both of your questions! The Mountain Top EVO-M Retractable Hard Tonneau Cover with T-Slot Accessory Rails - Aluminum item #MNT29FR is confirmed to fit the 2021 Chevy Silverado 1500's with a 6-1/2' bed. It is also compatible with the…

view full answer...

Answer 11

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

2021 Chevy Silverado 1500 Replacement Retrax XR Side Rails for 5-3/4 Foot Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching