Spare Tire Carrier For Rear RV Bumper

Question

Question:

Is there any reason this can’t be mounted to the rear of a travel trailer bumper?

asked by: James G

0

Expert Reply:

The Offset Trailer Spare Tire Carrier by Dutton-Lainson # DL22120 can fit to your bumper if it is less than 3 inches wide and 5 inches tall.

If you need a different one I recommend the Brophy Rigid Mount Spare Tire Carrier # BR56VR. This model can hold any spare tire up to 17-1/2 inches and will mount to a bumper that is up to 4-1/2 inches.

expert reply by: David B

0

Answer 1

We don't carry a bumper mounted spare tire carrier capable of the weight of a Class C Motorhome spare tire, however, we do have a hitch mounted option. The Roadmaster Hitch Mounted Spare Tire Carrier w/ 2" Receiver Opening #RM-195225 is an…

view full answer...

Answer 2

For that heavy of a wheel and tire I would recommend a hitch mounted option like the part #RM-195125 as your most ideal solution since hitches are the most sturdy attachment point. But if your rear bumper is welded all the way around and reinforced…

view full answer...

Answer 3

Screen door latches are easy to replace. You will simply need the Bi-Directional Screen Door Latch #37206-11865 or the Bullet Door Latch for RV Screen Door #37210785. The access to the latch on the ouside is not covered and from the inside you simply…

view full answer...

Answer 4

According to my contact over at JR Products, there are not specific instructions to install the Bullet Door Latch for RV Screen Door #37210785. However, I have attached some photos that show how everything fits together that should hopefully make the…

view full answer...

Answer 5

Great question, Mike! The Brophy Rigid Mount Spare Tire Mount #BR56VR doesn't actually have a weight rating because it's been rated for tires that fit on up to 17-1/2" wheels. So this will be able to handle the weight of your 16"…

view full answer...

Answer 6

The Kenda Karrier ST175/80R13 Radial Trailer Tire with 13" Black Mod Wheel #AM31990 has a zero offset which means the backspacing is exactly the width of the rim plus an inch to account for the mounting lip. So that means the backspacing is…

view full answer...

Answer 7

Yes the Brophy Rigid Mount Spare Tire Carrier #BR56VR that you referenced would fit your bumper that is 4 inch square, has enough weight capacity, and can work with your bolt pattern.

view full answer...

Answer 8

There isn't a retention strap currently offered to keep the first two panels of the BAKFlip G2 Hard Tonneau Cover #BAK26204 open while towing but you could easily make two with some straps and side-release buckles. I recommend picking up the…

view full answer...

Answer 9

The 2,500 lb weight rating for the Hellwig Pro Series Helper Springs #HE47QR is a great option for your 2022 Mercedes-Benz Sprinter 3500 since motorhomes tend to have a bit more weight to them. These springs are also considered progressive so they…

view full answer...

Answer 10

To secure your spare tire to the Brophy Rigid Mount Spare Tire Carrier #BR56VR I recommend using the Tow Ready Spare Tire Lock #FSTL0603 which will go over the stud and lock the nut on to the trailer. The metal construction of the #FSTL0603 makes it…

view full answer...

Answer 11

You sure can measure to find the correct bolt pattern on your wheels if you can see the lugs. On a 5-bolt pattern, the easiest way is to measure from the center of one bolt hole center to the center of the bolt hole next to it. If that measurement is…

view full answer...

Answer 12

I have attached a few photos for you with all the dimensions we have for the Ark Drop Down Corner RV Stabilizer Jacks part #AR34FR. That said, Ark is an Australian company so the measurements are in metric, millimeter to be specific so you may need…

view full answer...

Spare Tire Carrier For Rear RV Bumper

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching