Replacement Motor for Kwikee 32 Series RV Steps on a 2009 American Allegiance Model 42G

Question

Question:

Mine is a 32 series step by Kwikee ….The motor and screws 214 ……..part # 1101428

asked by: Bobby S

0

Expert Reply:

We do have a number of replacement motors for steps available. I tried looking up what steps you have on your 2009 American Allegiance Model 42G but was unable to locate them. This is not unusual, often times the step model will not be listed because they may need to switch from one to another. If you could let me know what make/model steps you have I would be happy to track down the correct motor for you. If you are unsure, you can send me some pictures and I may be able to identify it from them.

expert reply by: Scott S

0

Bobby S.

2/14/2022

Mine is a 32 series step by Kwikee ….The motor and screws 214 ……..part # 1101428

Reply

Scott S.

2/15/2022

Thank you for that additional information. The correct replacement motor for your Kwikee 32 series steps is the Replacement Motor for Kwikee Electric RV Steps # LC379147 which is the Kwikee part number 1101428.

Reply

Answer 1

The correct replacement motor for your Kwikee 32 Series Steps is going to be the Lippert Components Kwikee Motor and Screws part #LC379147.

view full answer...

Answer 2

To replace the gear and motor on a Kwikiee Series 32 step you will need the Replacement Gear Box and A Linkage for Kwikee Electric RV Steps #LC379160 and the motor #LC379147.

view full answer...

Answer 3

The correct replacement motor for Kwikee 32 Series Steps is the Replacement Motor for Kwikee Electric RV Steps part #LC379147.

view full answer...

Answer 4

The gear on the Lippert #LC379147 motor meshes with the gear in the gear box. If the old gear box is fine then you will just reuse it. Same for the controller. Hold onto the old motor, or at least photograph the stickers in case that information is…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Since you need the Replacement Control Unit for Kwikee 38 Series Electric RV Steps #LC363989 I'm assuming you have 38 series steps on your 2017 Thor Windsport. The correct replacement motor for these steps would be the #LC379147.

view full answer...

Answer 8

Thank you for the pictures- they're always helpful! I have a solution for you, but the Lippert gear box you were looking at is a replacement for the newer Kwikee 32 Series Steps. I spoke with my contact at Lippert and they said that the gearbox…

view full answer...

Answer 9

To find the fuse for your Kwikee Electric RV Step Complete Assembly #LC3658373 you'll need to trace the power wire from the switch to the battery. If you think you've found it then you can test continuity of the fuse and replace if necessary.…

view full answer...

Answer 10

There are indeed many different replacement step controllers out there and I am happy to re-confirm that the correct current item to replace your Kwikee step controller 1800709 is part #LC363989. I verified this item with my parts contacts at…

view full answer...

Replacement Motor for Kwikee 32 Series RV Steps on a 2009 American Allegiance Model 42G

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching