Replacement Bearing Kit For Boat Trailer That Has 1-3/8" Inner Bearing and 1-1/16" Outer Bearing
Question:
I would like to purchase boat trailer replacement bearings. I was told it was a 1-3/8” inside bearing and 1-1/16” outter bearing. Do you have a part number for the seal and bearing kits? Thank you.
asked by: John L
Expert Reply:
It sounds like you have the Inner Bearing # L68149 and Outer Bearing # L44649. These are the common bearing combination used on most 3,500lb axles. The Hub Bearing Kit # BK2-100 contains the bearings, races, grease seal, cotter pin and tang washer for 1 hub. Be sure to order 1 kit for each hub.
If the boat trailer is an EZ Loader they will commonly use a Double Lip Seal for 3,700-lb Marine Hubs # 168255TB. I can confirm this if you can get me the VIN number on the trailer, or you can pull apart one of your hubs to check the seal for identifying marks. If no marks are present this seal has an inner diameter of 1.687".
Products Referenced in This Question
Double Lip Seal for 3,700-lb Marine Hubs
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.687 Inch I.D.
- 2.561 Inch O.D.
- Dexter
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels