Front Hitch Confirmed to Fit a 2022 Jeep Wrangler Unlimited

Question

Question:

I have a 2022 Jeep Wrangler Unlimited and I am looking for a front hitch. Do you have one for my Jeep?

asked by: Julio

0

Expert Reply:

We do. The Curt Front Mount Trailer Hitch Receiver # C31086 is a confirmed fit for the 2022 Jeep Wrangler Unlimited. This hitch is made in the USA and has a bolt-on, no-drill installation.

expert reply by: Scott S

0

Answer 1

We do have the Curt Front Mount Trailer Hitch Receiver #C31086 which is comfirmed to fit all but the Rubicon and Mojave trim levels of your 2023 Jeep Gladiator. This will allow you to then position the Bulldog Winch Hitch Mounted Winch Mounting Plate…

view full answer...

Answer 2

The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #C31086 is a confirmed fit for a 2020-2021 Jeep Gladiator. I just confirmed the fit with the manufacturer it will install in the same way as shown in our video of the Wrangler…

view full answer...

Answer 3

There is a front mounted hitch for your 2024 Jeep Wrangler JL so long as it is NOT the Rubicon. For all other models of '24 Wrangler JL the correct fit is the following part: - Curt Front Mount Trailer Hitch Receiver #C31086 I verified this fit…

view full answer...

Answer 4

You can install the Curt front hitch #C31086 on your 2021 Jeep Wrangler Rubicon but you will have to modify the heat shield like you mentioned. The Draw Tite part #65079 is also a fit and requires less modification though so it would be what I would…

view full answer...

Answer 5

Yes, you can so long as your 2024 Jeep Wrangler 4xe is not a Rubicon. The Curt Front Hitch item #C31086 is custom fit and bolts to your Jeep with included hardware. It has a 2" receiver that gives you a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Answer 6

Yes, The Curt Front Mount trailer hitch #C31086 is confirmed to fit your 2023 Jeep Wrangler. I recommend this front mount hitch over the styles because it is made in the USA and because the installation is a lot easier then other hitches. The hitch…

view full answer...

Answer 7

Yes there is - check out the Curt Front Mount Trailer Hitch Receiver #C31086. This hitch is custom to fit your Wrangler, has a max vertical load limit of 350 lbs and a max line pull limit of 9,000 lbs.

view full answer...

Answer 8

To add a front mounted hitch to your 2023 Jeep Gladiator. You will want the Draw-Tite Front Mount Trailer Hitch item #65079. This hitch is custom fit and bolts to your Jeep with included hardware. This hitch will not fit the Rubicon and Mojave…

view full answer...

Answer 9

I reached out to my tech contact at Curt and he said the Curt Front Mount Trailer Hitch Receiver #C31086 has been test fit on your specific Rubicon model and it is a confirmed fit. You will need to remove the steel skid shield permanently for this…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Front Hitch Confirmed to Fit a 2022 Jeep Wrangler Unlimited

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching