Availability of Specific Lock Core for Hitch Lock for Kuat Bike Racks

Question

Question:

Can we get this hitch pin lock with key code 1940?

asked by: Jesse F

0

Expert Reply:

In the past, Kuat did have specific lock numbers available to order but that has changed. Unfortunately, a specific lock number is not something that is available. Assuming you have a 2" hitch, the Hitch Lock for Kuat Bike Racks - 2" Hitches # HL2 is the correct lock for your NV 2.0, NV 2.0 Base, or Sherpa 2.0 bike rack. The only choice would be to have two different keys between your locks.

expert reply by: Robin H

0

Answer 1

In the past, Kuat would be able to match keys with lock cores based on the code, but now that is not necessary as you would just need to order Replacement Lock Cores #LOCO for your Kuat NV Bike Rack #NV22B. This comes with 2 lock cores, 2 keys, and…

view full answer...

Answer 2

Kuat used to have specific replacement keys, but now they send you randomly numbered lock cores and matching keys. Before I could recommend that you look for the number on the lock's face of your Kuat NV #NV22B and getting the matching key, but…

view full answer...

Answer 3

At one time we were able to obtain specific lock cores from Kuat, but they only offer the cores in randomly numbered sets of 2, part #LOCO, sets of 4 as part #LOCO4 or 6 as #LOCO6. If you purchase a set, all the cores will be keyed alike. So your…

view full answer...

Answer 4

For the Kuat Transfer V2 bike rack #KU74FR the hitch lock you'd want is the part #HL1 since the Transfer V2 has a built in anti-rattle device.

view full answer...

Answer 5

Yes, the lock core that comes with the Cable Locks and Hitch Lock for Kuat Transfer 2 Bike Rack #PTSCLK12 is the same lock core that comes with the #HLT. If you have a Kuat Transfer TS02G this kit will allow you to lock the rack to the hitch and the…

view full answer...

Answer 6

Threaded anti-rattle hitch locks are specific to certain bike racks. So if you have the Kuat Transfer 2 Bike Platform Rack TS02G then you would need to use the Anti-Rattle Hitch Lock for Kuat Transfer Bike Racks #HLT.

view full answer...

Answer 7

If you have the Kuat Transfer V2 #KU84FR you can use the #HLT hitch lock!

view full answer...

Answer 8

The 175 lb tongue weight rating is what I'm seeing in the owner's manual for your 2021 Toyota RAV4 Hybrid as well, so even though the Curt Trailer Hitch #C13416 has a tongue weight rating of 600 lbs, the 175 lb rating of your vehicle is the…

view full answer...

Answer 9

Yes, the Hollywood Racks 2" Hitch Lock and 8' Cable Lock for Bike Racks, part #HRLHPC2, will work with the Kuat Transfer V2 Bike Rack for 4 Bikes - 2" Hitches - Wheel Mount, part #KU77FR. The Kuat Transfer V2 uses a 5/8" hitch pin…

view full answer...

Answer 10

I do have an option for you but the 1 Bike Add-On for Kuat Transfer V1 1-Bike Platform Rack part #TSAOB is only compatible with the single bike carriers. Therefore, if you want to carry four bikes you'll need a new carrier, I recommend the Kuat…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Availability of Specific Lock Core for Hitch Lock for Kuat Bike Racks

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching