What is the Maximum Height of the Dutton-Lainson Bolt-On, Drop Leg Trailer Jack - Sidewind # DL22320
Question:
So, what is the total possible height that this jack will extend using the foot adjusting holes and the 15 inch travel? I need to know maximum height from bottom of mounting bracket to the foot using all possible extensions available. Thanks
asked by: Robert H
Helpful Expert Reply:
I went to the warehouse and extended the Dutton-Lainson Bolt-On, Drop Leg, Trailer Jack # DL22320 fully. The overall, maximum height available is approximately 33 inches from the footplate to the bottom of the mounting plate.
A couple of other dimensions you may be interested in are noted in the picture. The height of the mounting plate is 6-1/2 inches and the width is 6-5/8 inches. The distance from center of the mounting hole to center is 5-1/2 inches.
I have attached a FAQ article concerning trailer jacks.
Product Page this Question was Asked From
Dutton-Lainson Trailer Jack w/ Footplate - Sidewind - Fixed Mount - 28-1/2" Lift - Zinc - 2.5K
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 2001 - 3000 lbs
- Sidewind Jack
- 28 Inch Lift
- Weld-On
- With Rectangle Foot
- Dutton-Lainson
more information >
Continue Researching
- Shop: Dutton-Lainson Trailer Jack w/ Footplate - Sidewind - Fixed Mount - 28-1/2" Lift - Zinc - 2.5K
- Video: Trailer Valet JXS Trailer Jack with Footplate Review
- Q&A: Needing the Bolt Pattern and Dimensons for a Dutton-Lainson Tongue Jack
- Shop: Dutton-Lainson Boat Trailer Tongue Jack - Bolt On - Sidewind - 30" Lift - 2,000 lbs
- Video: Dutton-Lainson Trailer Jack - Side Frame Mount Jack - DL22320 Review
- Shop: Trailer Valet JXS Drill Powered Swivel Trailer Jack w/ Footplate - Sidewind - 14" Lift - 2K
- Shop: Tire Chains
- Shop: Trailer Valet JXS Drill Powered Swivel Trailer Jack w/ Footplate - Sidewind - 14" Lift - 5K
- Shop: etrailer Boat Trailer Jack w/ Footplate - Sidewind - Fixed Mount - 29-1/8" Lift - Zinc - 2.5K
- Shop: Square Direct Weld Jack w/ Footplate - Drop Leg - Sidewind - 28-7/8" Lift - 7,000 lbs
- Shop: Square Direct Weld Jack w/ Footplate - Drop Leg - Topwind - 28-3/4" Lift - 7,000 lbs
- Search Results: trailer jack
- Q&A: What is the Bolt Hole Size of the Dutton-Lainson Bolt-On Trailer Jack # DL22320
- Shop: Trailer Hitch
- Video: Rhino-Rack Roof Mounted Steel Cargo Basket Review
- Video: Rhino Rack Roof Basket Review - 2016 Audi Q5
- Q&A: Recommendation for Weld-On Rear Jacks for 2020 Griffin 7 Ton Dump Trailer
- Q&A: etrailer Square Jack w/ Footplate to Replace Ram Side Wind Jack
- Video: etrailer Trailer Jack - Side Frame Mount Jack - MJSQ-2500B Review
- Search Results: tongue jack
- Q&A: Mounting Hardware for etrailer 2.5 Square Jack # MJSQ-2500B
- Q&A: Bolt Pattern Of Dutton-Lainson Bolt-On Trailer Jack
- Video: Review of Dutton-Lainson Trailer Jack - Boat Trailer Jack - Side Frame Mount Jack - DL97MR
- Q&A: Bracket to Install Fulton XLT Jack on Mastercraft Boat Trailer
- Video: Review of Trailer Valet Trailer Jack - Side Frame Mount Jack - TV34FR