Bearing Kit for 1999 Airstream Bambi Camper

Question

Question:

I need wheel bearings and seals for my 1999 Airstream Bambi, Can you advise? Thanks

asked by: David G

0

Expert Reply:

I am almost positive your 1999 Airstream Bambi has 3,500 lb axles on it so the correct bearing kit would be the part # BK2-100. You can easily verify this by measuring the diameter of the axles and make sure they are 2-3/8 inches or you can look on the axle for the sticker with the axle info and it will be listed there.

expert reply by: Jameson C

0

Answer 1

The Dexter hub part number prefix 8-201 could refer to many items and includes many possible weight capacities. So the best way to go is to pull one hub, remove the bearings and find their stamped part numbers. If you happen to know the axle's…

view full answer...

Answer 2

The Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel - 15" x 6" Rim #AM22646 is sold without caps having a 4.25" pilot diameter so the Trailer Wheel Center Cap #425EZ, Lionshead Trailer Wheel Center Cap #LHCS108-SI60C, or the Americana…

view full answer...

Answer 3

Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH57RV will fit your 2020 Ram 1500 with the 5'7" bed and no Ram box. Unfortunately, this rack is only available in the silver color. We do offer the TruXedo Elevate Truck Bed Rack…

view full answer...

Answer 4

Hi Ruben; thanks for the question, and while there is one rack for your 2023 Ford F-150 with a 6-1/2' bed compatible with the Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover #PE66UV, it does not have sides, and is part #TX84NV.…

view full answer...

Answer 5

Tonneau covers and ladder racks can be compatible with each other when they do not use the same mounting points on the truck bed rails. Both tonneau covers and ladder racks can mount either inside the bed rails or on top of them. As an example, the…

view full answer...

Answer 6

Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…

view full answer...

Answer 7

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 8

Yes, the Timken Bearing Kit #TMK52VR will fit your 3,500 lb axle as it fits an standard #84 spindle. The only time this kit won't fit with a 3,500 lb axle is if the trailer/axle is made before the 2000's since that's about the time that…

view full answer...

Answer 9

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 10

The Dexter bearing kit part number K71-717-00 that you referenced is the bearing kit for a number 84 spindle. Our part number for that bearing kit is #BK2-100.

view full answer...

Answer 11

Depending on how the trailer was made, there will be a few spots you can check to identify the axle. First, if the trailer was pre-made by a specific company, you may be able to find this information in either the paperwork or on a placard somewhere…

view full answer...

Answer 12

Hey Roy, The only U-bolt kit we currently only offer for 1-1/2" square axles is part #CE23102, which only has a 3-3/8" length so it likely wouldn't be the best option for you. Instead you'll want to order the 1-1/2" Square…

view full answer...

Bearing Kit for 1999 Airstream Bambi Camper

Product Page this Question was Asked From

Continue Researching