Weight Of The MORryde Trail Kitchen With Stove Tray For Jeep Wranglers And Its Accessories

Question

Question:

HelloIm interested in your MORryde trail kitchen for my 2003 Jeep Wranger TJ Rubicon. I am extremely limited on payload so weight is a huge factor. What is the weight of the basic trail kitchen without the accessories? If you have the weight on the accessories compatible with the Jeep TJ, let me know those also. Finally, I absolutely DO NOT want to drill in the floor plan of my Jeep. Unfortunately, the only drill free applications are the bolt on kits for the JK/JL. Does MORryde make a bolt-on kit for the Jeep TJ or do you know where I can get one? If not, I will have to fabricate my own light-weight mounting system to use existing holes from my rear seat bolt holes. If you have any recommendations with this idea, please let me know. However, if it were that simple and cost-effective, somebody would probably manufacture and sell it, so I am not holding high hopes of achieving this. Thanks

asked by: David G

0

Expert Reply:

The MORryde Trail Kitchen with Stove Tray for Jeep Wrangler or Wrangler Unlimited # MR73QR weighs approximately 84lbs.

MORryde MOLLE Accessory Grid Attachment for Jeep Trail Kitchen # MR23MR weighs 12lbs.

MORryde Countertop Extension for Jeep Trail Kitchen - 12-1/2"x 13" # MR95MR weighs 10lbs.

MORryde Sink Addition for Jeep Trail Kitchen # MR99UR weighs 44lbs.

MORryde Deluxe Sink Addition for Jeep Trail Kitchen # MR59UR weighs 44lbs.

MORryde Countertop Extension for Jeep Trail Kitchen - 14" x 21" # MR55MR weighs 17lbs.

MORryde unfortunately does not have a drill free kit for your 2003 Jeep TJ so you would need to fabricate your own mounting system if you wanted to avoid drilling into the floor of your vehicle.

expert reply by: Kevin C

0

Answer 1

The Truma Cooler used in the video for the Trail Kitchen with Stove Tray for Jeep Wrangler or Wrangler Unlimited Item #MR73QR is approximately 19" tall.

view full answer...

Answer 2

Yes, it is best to relocate anything in an underfloor compartment that has access interrupted once the MORryde Camping Kitchen, #MR73QR is installed.

view full answer...

Answer 3

The height of just the mounting bracket of the MORryde part #MR73QR is 6.6 inches and the length is 30 inches. It weighs 84 lbs.

view full answer...

Answer 4

Removing the trays of the MORryde Camping Kitchen with Propane Stove Tray for Jeep Wrangler #MR73QR is just like removing drawers from an office desk. You'll pull the tray all the way out and then you'll see a release lever in the track that…

view full answer...

Answer 5

The MORryde Camping Kitchen with Propane Stove Tray for Jeep Wrangler #MR73QR only has mounting holes for the MOLLE panel on the right side so you would need to drill new holes on the other side of the tray in order to mount the panel on the other…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

When determine if you can fully open swing-out doors on your 2022 ProMaster 3500 with the Yakima EXO #Y34ZR, it really depends on how far your doors swing when in the open position. While the 90-degree swing has not been tested spcificially on a 2022…

view full answer...

Weight Of The MORryde Trail Kitchen With Stove Tray For Jeep Wranglers And Its Accessories

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching