What Fairing Should I Use With My 100" X 62" Pioneer Platform

Question

Question:

could you tell me what Faring I need to purchase for this Rack? Thanks

asked by: Rick B

1

Helpful Expert Reply:

Ideally, you would want a 58" fairing for your 62" wide Pioneer Platform. The closest size fairing we have to 58" is the Rhino-Rack Fairing for Pioneer Platforms - 52" Long, part # RR43251. This fairing is 52" in length.

I have included a product description link and a video review link below.

expert reply by: Mark Smith

1

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

To know for sure if either rack fits with the spare tire on your Roadtrek van you can take a simple measurement. Measure from the hitch pin hole on your hitch receiver to the furthest point of the spare tire. You need this to be no more than 9 inches…

view full answer...

Answer 4

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 5

Thanks for the picture! The Rhino-Rack Universal Pioneer Platform Rack for Crossbars Item #RR42115BF will fit your Garvin Expedition crossbars if they are less than 3-5/8" wide. I have attached a couple of videos that demonstrate how this…

view full answer...

Answer 6

The Rhino-Rack Fairing for Pioneer Platforms part #RR43251 is compatible with all gen Rhino-Rack Pioneer Platforms that are 56" wide so you will be good.

view full answer...

Answer 7

Absolutely! To fit a Rhino-Rack Pioneer Platform Rack on your 2024 Toyota Sienna OEM roof rack you need the part #RR42115BF. This comes with mounting hardware that clamps around crossbars which is perfect for pretty much any crossbar style out…

view full answer...

Answer 8

In order to find the correct replacement fender for a trailer you'll need to know the wheel size. The CE Smith Single Axle Trailer Fender part #CE17960ATB seems to be a goof match but it's for 13" wheels. If this is not the size you have…

view full answer...

Answer 9

It looks like the interior of the switch was damaged. It's not a big deal assuming it's an electric breakaway system. You can just replace the switch assembly very affordably. The switches use two wires to connect, so they're not system…

view full answer...

Answer 10

Our installers and customer experiences have led us to believe that the Furrion tankless heaters like the part #FR98SR are by far the best and most reliable so that is what I would recommend. Not saying that the Fogatti is a piece of junk but the…

view full answer...

What Fairing Should I Use With My 100" X 62" Pioneer Platform

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching