What Is The Maximum Size Bars The Yakima Universal Mounting Hardware For Yakima PowderHound Will Fit

Question

Question:

I have a custom 2 1/2 pipe rack on my truck. Wondering if this hardware will fit my truck rack. I have a powder hound I want to attach.

asked by: Elden A

0

Expert Reply:

The Replacement Mounting Hardware for Yakima PowderHound, Big PowderHound or FreshSesh # Y8860040 will work with cross bars that measure a maximum of 4" wide, and 1-1/4" tall. So if your cross bars fit into that range, then these will work for you.

expert reply by: Bryce D

0

Answer 1

To adapt your older Yakima Powderhound to fit the aero style bars on your 2015 Buick Encore will require the Universal MightyMounts #Y03590.

view full answer...

Answer 2

The Replacement Mounting Hardware #TH05603 is 4 inches on center. If this is what your X-cargo XL 90040 roof box has, then it will be a fit without modification. Another option is the hardware kit #TH04997 that is also 4 inches on center. If your…

view full answer...

Answer 3

We do offer replacement parts for your Sears X-Cargo 20-SV rooftop cargo box. For a set of 2 locks and 2 keys you can use part #SR03807. This will work if the locks look the same. There is a lock nut on the back of the lock assembly that will need to…

view full answer...

Answer 4

We have replacement keys for your Sears X Cargo 20 series cargo carrier. In order to get the correct one you will need to know the key number of your current setup. If you do not have a key to get the part number off of, the lock on the cargo box…

view full answer...

Answer 5

I double checked and the Replacement Mounting Hardware #1032802 will not have every piece needed to do a full replacement on your Karrite 1300 Series roof box. It will definitely fit your roof box, but you will also need Qty.4 of the Replacement…

view full answer...

Answer 6

Yes. You can also use the Replacement Hardware Kit for Searsbox Cargo Box #TH05603 to replace the mounting hardware on your Sears X-Cargo box. The installation process will be slightly different, but they can be made to work quite easily.

view full answer...

Answer 7

Yes, you can use Yakima's Universal MightyMounts Kit #Y03590 to adapt your vintage Buttondown 6 ski carrier to work with aero style crossbars. I confirmed compatibility with my contact at Yakima. This kit will work with crossbars having…

view full answer...

Answer 8

I reached out to my contact at Yakima to ensure we get you the right mounts you need. He told me that for you Yakima Buttondown 4, you will need the Universal MightyMounts for Yakima Roof Mounted Accessories, #Y03590. These MightyMounts will ensure…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 12

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

What Is The Maximum Size Bars The Yakima Universal Mounting Hardware For Yakima PowderHound Will Fit

Product Page this Question was Asked From

Continue Researching