What Hubs do I Need for My 1998 Calkins Boat Trailer?
Question:
Here is the inspection plate for my 98 calkins trailer. I have 5bolt 4and half inch hub, will this narrow down to which hub I need to order.
asked by: Wcjohnson
Expert Reply:
If both of your inner and outer bearings are # L44649, you most likely have a 2K axle. Depending on your bolt pattern, I recommend the following hubs:
- Trailer Idler Hub Assembly for 2,000-lb Axles # AKIHUB-545-2-G-2K (5 on 4-1/2 pattern)
- Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 # 8-91-05UC1 (4 on 4 pattern)
If you need the hub/drum combination, I recommend the following:
- Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 # AKHD-545-2-2K (5 on 4-1/2)
We unfortunately do not have any hub/drum assemblies at a 2,000 pound capacity, but we do have the Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter # 8-173-16UC3 that will do the trick.
If you happen to have different capacity axles, please feel free to respond to this answer with the capacity you have on your axles.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter - 4 on 4
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44649 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Replacement Dexter Hub for 8-91A Hub
- Q&A: Solution for Replacement Hubs on Northern Tool Ultra-Tow 49803 Aluminum Trailer
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Bearings and Seals for a Dexter Hub with 8-91A Stamped on Back
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: What is Correct Replacement Grease Seal for Bearing # L44649
- Q&A: Bearing Buddy Recommendation for Dexter Hub 8-248 3,500 lb Axle
- Q&A: Replacement Hub and Spindle for Dexter 69-46 Axle
- Article: Trailer Tire Sizing
- Article: How to Measure a Trailer Axle
- Article: How to Bleed Your Trailer Surge Brakes
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
William J.
1/1/0001
Here is the inspection plate for my 98 calkins trailer. I have 5bolt 4and half inch hub, will this narrow down to which hub I need to order.