Will 60 Inch Trailer Axle Fit 5x8 Carry-On Trailer
Question:
Will this axle fit a Lowes carry-on 5x8 mesh trailer, 13 inch wheels model number: Model #5X8LSPHS Thanks!
asked by: Richard C
Expert Reply:
In order to find if the Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs # e82GR will fit your Carry-On Trailer you will need to measure the current axle. From what I have found you have the capacity right, this trailer uses a 2,000 lb axle. The only thing you will need to find is the hub face to hub face measurement. This axle measures 60" so if your current axle matches, it will fit your trailer.
I have attached a helpful diagram showing where you need to measure. We have 60" and 72" 2,000 lb axles available. If you find that your measurements do not match these lengths then your only option would be a universal system like the Timbren # A20RS545.
I have attached some review videos along with a link to all of our 2,000 lb axles for you to check out.
Products Referenced in This Question
Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can etrailer 2,000 lb Axle be Flipped
- Q&A: Recommended Hitch for a 2011 Subaru Outback
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Measure a Trailer Axle
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Torque Spec for U-Bolts on 2K Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long
- Q&A: Brackets to Mount CE Smith Trailer Fenders
- Q&A: Replacement Trailer Hub for the TDE 46205 with Galvanized Finish
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: How to Raise Your Travel Trailer Height
- Article: Trailer Tire Sizing