What is Lowest Height Setting of Ultimate Trailer Jack 322-RDJ-2K
Question:
Hello, I need a question answered about your ultimate trailer jack 322_RDJ-2K. I need to know the what the height of the top tube is when the jack is dropped to its lowest point. Can the top tube be lowered beyond the first hole on the tube, meaning, no hole is used. I dont want to crank in this position, I just need a very short top tube and handle, as my tailgate hits the unit I have on now....so when I have to lower my tail gate with my trailer on, I need it low enough that my tailgate does not hit the crank. Remember, I dont want to crank with the pin in no hole, just it down while the trailer is still attatched to the truck so I can open my tailgate. I need to know the total lowest height from the mounting flange to the top of the crank. What I have on now is 12 1/2 Anything less that 8 will allow my tailgate to lower fully. Thanks
asked by: Tom F
Expert Reply:
When the Ultimate Jack part # 322-RDJ-2K is in it's lowest position it would be 7-1/4 inches tall above the trailer frame. So since you need 8 inches or less for your tailgate to open this would work great with plenty of clearance.
Product Page this Question was Asked From
Ultimate Trailer Jack - A-Frame - Topwind - 27-1/2" Lift - 2,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Topwind Jack
- 28 Inch Lift
- Bolt-On
- Weld-On
- With Rectangle Foot
- Ultimate Jack
more information >
Continue Researching
- Video: etrailer and Ram Jacks Footplate Replacement Review
- Video: etrailer Trailer Jack JF-100-ZBK Review
- Shop: Ultimate Trailer Jack - A-Frame - Topwind - 27-1/2" Lift - 2,000 lbs
- Q&A: Will Replacement Footplate JF-100-ZBK Fit Ultimate Trailer jack 322-RDJ-2K?
- Shop: Aluminum Liger Trailer Wheel - 16" x 6" Rim - 8 on 6-1/2 - Glossy Black
- Shop: EZ Lock Trailer Coupler Lock for 1-7/8", 2", 2-5/16" Bulldog Collar-Lok Couplers
- Shop: Pro Series Detachable Footplate w/ Pin for 2" Diameter Jacks - 2,000 lbs to 5,000 lbs
- Shop: Replacement Footplate for etrailer and Ram 2-1/4" Jacks - 6-1/4" x 4-1/2" - 2,000 lbs
- Shop: EZ Lock Trailer Coupler Lock for 1-7/8", 2", 2-5/16" Bulldog Collar-Lok Couplers
- Search Results: footplate
- Search Results: trailer jack base plate
- Search Results: the ultimate trailer jack
- Search Results: trailer jack foot pad
- Search Results: tire
- Search Results: trailer jack footplate
- Search Results: trailer jack
- Q&A: Recommended Trailer Jack Allowing for Truck Tailgate Clearance for Homesteader Trailer
- Q&A: Low Profile Trailer Jack to Fit Under Tailgate of Truck
- Q&A: How Far Out Does the Pin on the Ultimate Trailer Jack # 322-RDJ-2K Stick Out
- Shop: Trailer Valet JXS Drill Powered Swivel Trailer Jack w/ Footplate - Sidewind - 14" Lift - 5K
- Shop: Trailer Hitch
- Article: Trailer Tire Sizing
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Video: Review of Ultimate Jack Trailer Jack - A-Frame Jack - 322-RDJ-2K
- Video: Ultimate Trailer Jack A-Frame Topwind Jack Review
- Shop: Trailer Wiring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Angle of Different Stabilizer Positions for Ark Drop Down Corner RV Stabilizer Jacks
on Trailer Jack
