Does Stealth Hitch for 2016 BMW X5 Require Trimming Rear Bumper

Question

Question:

I have a 2016 BMW X5 , by adding this, does it require me to cut or trim my bumper?

asked by: Ryan

1

Helpful Expert Reply:

The Stealth part # SH98VR that you referenced is the hitch opening and trailer wiring add-on for the Stealth hitch # SH56VR that fits your 2016 BMW X5 which we also carry as a complete kit with part # SH52VR. This does not require trimming or cutting of the bumper fascia but the hitch body/tube does replace the rear bumper beam of the vehicle.

expert reply by: Jameson C

1

Answer 1

Usually when vehicles have rear sensors there is a way to disable them in the settings of your vehicle - you shouldn't need to take your 2015 BMW X5 to have something done to the computer to accomplish this. You'll want to check in your…

view full answer...

Answer 2

Per the linked instructions, the etrailer brand #e84AR Class III hitch will require trimming a 4 x 2-1/4 inch piece of the bumper fascia away. I've linked to an install video for the #13077 hitch which installs in the same manner.

view full answer...

Answer 3

According to my research, the BMW Trailer Coupling Prep Package S8SLA contain a pre-wired pigtail for use with a plug-in style trailer wiring harness but not the actual trailer wiring harness nor a trailer hitch. That said, this plug-in style trailer…

view full answer...

Answer 4

I checked with Stealth Hitches and the correct one for your X5 xDrive 35i M Sport is item #SH79VR. This hitch is custom fit and bolts to your BMW with included hardware. The Stealth Hitches item #SH79VR includes a 2" receiver that can only be…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Does Stealth Hitch for 2016 BMW X5 Require Trimming Rear Bumper

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching