Can Uprights of Yakima Outpost Install At Different Points on Bed Rails Slid Back

Question

Question:

The front section can it be moved anywhere along the bed ? Is there a requirement or a reason you couldt move the front section back 12 inches or so ? thanks

asked by: Derek

0

Expert Reply:

Yes you can move the front upright of the Yakima OutPost HD Overland Truck Bed Rack # Y01152-5968 back 12 inches on the bed rails like you asked about.

expert reply by: Jameson C

0

Answer 1

The Uprights #Y01151 included with the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack #Y01151-58 are 16-3/4" long and 5-1/2" wide. They are height adjustable from 19" to 30" above the truck bed rail.

view full answer...

Answer 2

In order to install the Yakima 72" HD Tracks for Roof Racks, OverHaul HD, and OutPost HD #Y84MR on your vehicle you'd need to use a set of Yakima OutPost HD Overland Truck Bed Rack Uprights #Y01152. If you let me know what vehicle you're…

view full answer...

Answer 3

I do have options for you to use a Yakima SkyRise Tent like part #Y07406 but I am not aware of any solution that will allow you to use it with a Rhino-Rack Pioneer Platform Rack. The two products are not designed to be used together nor would either…

view full answer...

Answer 4

I have an answer for you. Unfortunately, I contacted Yakima and they do not have the measurement of the bottom of your 2020 Toyota Tundra to the bottom of the crossbars on the Yakima OutPost HD Overland Truck Bed Rack for Nissan/Toyota Utility Tracks…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Hey Brian, the Truxedo Elevate Ladder Rack part #TX46NV that you referenced is compatible with your Thule roof cargo box but you will also need the T-slot adapter part #TH27PQ which adapts the hardware to fit directly to the slot on top of the load…

view full answer...

Answer 11

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 12

The front header panel of the Bak tonneau cover part #BAK48331 that fits your 2022 Ford F-250 long bed is about 6 inches long and each of the folding sections is about 22-1/2 inches long.

view full answer...

Can Uprights of Yakima Outpost Install At Different Points on Bed Rails Slid Back

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching