Replacement Bearings and Grease Seal for 2007 EZ Loader Tandem Axle Boat Trailer
Question:
Can you tell me the bearing and seal size for a 2007 ez loader twin axle trailler
asked by: Mike
Expert Reply:
In order to find the correct replacement bearings and grease seal for your 2007 EZ Loader trailer you will have to take a look at your current bearings. Once you remove your bearings and grease seal, you will be looking for the part number on the side.
If the part numbers have worn off or can't be found, you will need to take some measurements using a digital caliper like the # PTW80157. You will be measuring the spindle where the bearings and grease seal sit. This will be the inner diameter which will allow you to find the correct bearings.
I have attached a diagram showing where part numbers are typically located and where to measure for your reference. I also included a link to all of our bearings and seals which you can filter by inner diameter.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels