Replacement Control Panel for LCI Jack System

Question

Question:

I have a 2019 Vanleigh Vilano 375FL fifth wheel. It has 6 jacks on it. Based on what I can see this part looks correct. I had a wiring problem that fried some components in my camper and I believe this control panel was fried too. I have 13 volts coming to the power harness but the panel won’t power up. I’m supposed to be traveling tomorrow but I can’t do anything with my jacks without this panel. Thanks

asked by: John

0

Expert Reply:

Thank you for providing those pictures, using the pictures I was able to determine that the Replacement Touch Screen Control Panel # LC83VR is the correct replacement for your Lippert jack system.

expert reply by: Scott S

0

Back of LCI control Panel
(click to enlarge)

Front of LCI control Panel
(click to enlarge)

Back of LCI control panel with s/n
(click to enlarge)

Answer 1

Thank you so much for the photos! They were super helpful, and I can verify for you that the correct touch screen panel for your Lippert 6-point leveling system is the part number you asked about: - Replacement Touch Screen Control Panel #LC83VR…

view full answer...

Answer 2

Thank you for the pictures of your current touch screen. Based on seeing them the correct replacement is the part #LC83VR that you referenced.

view full answer...

Answer 3

I am not sure what control panel you have on your 2019 Forest River Vengeance Touring Edition 40D. If you have the Ground Control 3.0 you will need the Replacement Control Panel for Lippert Ground Control 3.0 and Travel Trailer RV Leveling System…

view full answer...

Answer 4

It sounds like you're looking for the Replacement Quick Level Touch Panel for Lippert Components Level-Up Hydraulic Leveling System #LC74FR which works with the Level-Up system which your one control level up controller 807615 is designed…

view full answer...

Answer 5

You will need the Replacement OneControl Advantage Controller #LC88TF for your 2018 Sanibel 5th wheel. This controller is the replacement for your number 425749 control box.

view full answer...

Answer 6

The good news is your system is working. That lets us rule out 2 of the 3 possible components. Before replacing the third one, I recommend unplugging the connections on the panel and cleaning them prior to reconnecting. If this doesn't solve your…

view full answer...

Answer 7

It sounds like you're looking for the Replacement Quick Level Touch Panel for Lippert Components Level-Up Hydraulic Leveling System #LC74FR which works with the Level-Up system. This is the touch pad "controller" but if you are looking…

view full answer...

Answer 8

The pressure relief valve on your Furrion RV Tankless Water Heater #FR68SR could potentially be faulty from the manufacturer but before you make a warranty claim to Furrion you should test to see if the valve is correctly seated. Pull the lever on…

view full answer...

Answer 9

We do have a pressure relief valve for your Furrion RV Tankless Water Heater #FR93FR. The Camco RV Water Heater Temperature and Pressure Release Valve #CAM10423, is a 1/2 valve with a 4" probe that will help protect your RV's water heater…

view full answer...

Answer 10

Yes, the Replacement Touch Screen Control Panel for Lippert Ground Control TT Trailer Leveling System #LC83VR that you referenced does replace the Lippert part number 675806 as well.

view full answer...

Answer 11

If the Quick Level Touch Panel #LC74FR has a solid red light it is indicating low battery power to the system. This would explain the interior Touch Screen Panel #LC83VR not powering on as well. Be sure to test your battery and check the power…

view full answer...

Answer 12

It sounds like you need to reset your Lippert Ground Control 3.0 #LC675817. To do this follow these steps: 1. Turn “ON/OFF” button “OFF”. 2. Push “FRONT” button 10 times. 3. Push “REAR” button 10 times. 4. Control will flash and beep, LCD says “ZERO…

view full answer...

Replacement Control Panel for LCI Jack System

Product Page this Question was Asked From

Continue Researching