Timbren Axle-Less Suspension Upgrade for a 2022 Winnie Micro Minnie 1800bh Tandem Axle Trailer
Question:
Hello. I have a 2022 Winnie Micro Minnie 1800bh trailer with dual dexter axles. I would like to know if there is a compatible suspension in the Timbren Axle less line that could be installed in place of the factory suspension. The unit travels off road and the factory suspension is less than adequate. If a Timbren suspension is available, can you please let me know. Thanks.
asked by: Michael G
Expert Reply:
I understand your frustration and for your application I highly suggest upgrading with the Timbren Heavy-Duty Axle-Less Trailer Suspension item # ASR35HDS02. These are 3,500 lbs sets that have a 4" lift for a wider range of travel and larger tires for off road applications. The suspension units will replace your 2022 Winnie Micro Minnie 1800bh trailer's existing axles and operate independently. They will fit any frame width.
You will also need replacement hubs and drums. I recommend the Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb E-Z Lube Axles - 12" - 6 on 5-1/2 item # 8-201-9UC3-EZ. These are sold individually.
For replacement brakes the Dexter Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 6,000 lbs item # 23-105-106 are a great set. The fit wheel sizes 14-1/2", 15", or 16".
Products Referenced in This Question
Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 12 x 2 Inch Drum
- 6000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Dexter
more information >
Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Product Page this Question was Asked From
Timbren Rear Suspension Enhancement System
- Vehicle Suspension
- Rear Axle Suspension Enhancement
- Jounce-Style Springs
- Extra Heavy Duty
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Timbren Springs For a 2022Jayco Greyhawk 29MV on Ford E-450 Cutaway Chassis
- Q&A: Which Hellwig Anti-Sway Bars Should Be Installed on a 2022 Entegra Odyssey 26D
- Q&A: Recommended Rear Suspension Enhancement For a 2023 Ford E-450 Class C Cutaway Chassis
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Q&A: Will The Timbren Rear Suspension Enhancement TFERSDLB Help With RV Bumper Bottoming Out?
- Q&A: Recommended Timbren Rear Suspension Enhancement For 2018 Thor Vegas 24.1 Built On E-450 Chassis
- Q&A: Dimensions of the Timbren Suspension Kit part # TFERSDLB
- Q&A: Which Suspension Enhancement Kit is Best for 2018 Forest River 3251 DS LE Towing All the Time
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Stability Control for Heavy Duty Vehicles
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation on a Ford Full-Size Van
- Article: Timbren Suspension Enhancement Systems