Best Rooftop Cargo Box for a 2021 Toyota Sequoia

Question

Question:

What is your Best recomendation for a Toyota Seqouia Limited 2021 roof cargo box?

asked by: Joe

0

Expert Reply:

The best roof cargo box that we have is the Yakima CBX # Y86FR. This will fit your 2021 Toyota Sequoia, it has an aggressive design that is meant to mimic the design of newer vehicles, and the mounting system is especially easy to use.

I am attaching a review video of this box on a 2021 Tacoma for you to reference.

expert reply by: Jon G

0

Answer 1

Thank you for the information! It sounds like your 2020 Toyota 4Runner TRD Pro has the raised rails and OEM crossbar setup that we'd find on the standard 2020 Toyota 4Runner. This has very low clearance under the factory crossbars so it's…

view full answer...

Answer 2

There is a good option for your 2021 Tesla Model Y with the factory roof rack that will allow you to open your rear hatch, and I did verify the fits with the manufacturer for you. The factory rack does have a crossbar spread of 35 inches, and the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 5

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 9

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 10

I checked with Yakima and their 58 inch round bar roof rack part numbers #Y00409, #Y00145, #Y03536, #Y44UV is a fit for your 2023 Chevy Tahoe with he factory rack so this would give you what you are looking for.

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Best Rooftop Cargo Box for a 2021 Toyota Sequoia

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching