How Deep In the Bed Does the Retrax Cover Sit on a 2020 GMC Sierra 2500 with 6.5' Bed

Question

Question:

When Retrax PRO XR Manual Retract cover is closed can I fit my 20 inch high generator in the bed? Is there enough clearance? 2020 GMC 2500 6 3/4 Crew cab.

asked by: Duane L

0

Expert Reply:

The RetraxPRO XR Hard Tonneau Cover part # RTX46SR which is a fit for a 2020 GMC Sierra 2500 only sits about 1.5" down from the edge of the bed. Therefore, if you measure from the top of the bed rail to the bottom of the bed floor and subtract 1.5" you'll have your answer.

expert reply by: Conner L

0

Answer 1

Yep! The iN-Command RV Tire Pressure Monitoring System #NCTP100 was designed to be compatible with the iN-Command setup you have on the center console of your 2020 Chevy Silverado 2500 so it will be visible on your truck's display.

view full answer...

Answer 2

I recommend the RetraxPRO XR Hard Tonneau Cover #RTX46SR for your 2022 Chevrolet Silverado 2500 with the 6-3/4' bed. This cover has a matte black finish that is both scratch resistant and will not fade in the sun. The locking handle allows you to…

view full answer...

Answer 3

I do have an option for you but there isn't really any tie-down kits designed specifically for the Rextrax XR Tonneau Covers. That said, we have heard back from customers that the Tie-Down Kit for TruXedo Elevate Rack System part #TH52FR is…

view full answer...

Answer 4

The #BR96ZR is the only compatible mat that BedRug currently has for the 2023 GMC Sierra 3500 with Multipro Tailgate. This liner is the entire bed along with the tailgate, which is more than you were asking for but is the only option that they…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 11

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 12

Hey Brian, the Pace Edwards Full Metal JackRabbit part #PE36CV that you referernced has a 300 lb weight capacity when spread evenly on the cover. The Retrax Pro XR on other hand has a 500 lb capacity.

view full answer...

How Deep In the Bed Does the Retrax Cover Sit on a 2020 GMC Sierra 2500 with 6.5' Bed

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching