Can TireMinder TPMS for Dual Axle Trailers # TPMS-TRAILER be Used on Steel Valve Stems

Question

Question:

My trailer has steel tire stems. Will this unit work?

asked by: Tim A

0

Expert Reply:

Yes the TireMinder TPMS for Dual Axle Trailers # TPMS-TRAILER can be used on steel tire stems like what your trailer wheels have.

expert reply by: Jameson C

0

Answer 1

The Tireminder TPMS part #TPMS-TRAILER uses the 433 MHz frequency. If there was a tire pressure loss there would be an alert sent to the monitor.

view full answer...

Answer 2

Yes the TireMinder TPMS for Dual Axle Trailers #TPMS-TRAILER that you referenced can be used with rubber valve stems like you asked about.

view full answer...

Answer 3

The TireMinder TPMS for Dual Axle Trailers, #TPMS-TRAILER has 2 Adhesive, hook-and-loop strips let you mount monitor to windshield or dashboard, or wherever you choose.

view full answer...

Answer 4

The TireMinder TPMS for Dual Axle Trailers #TPMS-TRAILER is going to be a good economically priced option for you that does what you are looking for. The #TPMS-TRAILER runs checks every 6 seconds and sends alerts to the monitor. The LCD color monitor…

view full answer...

Answer 5

The TireMinder TPMS for Single Axle Trailers #TPMS-TRL-2 that you referenced is compatible with the rubber valve stems your trailer wheels have currently. The sensors work great on metal and rubber valve stems.

view full answer...

Answer 6

We have reached out to TireMinder in the past about their sensors, like what is included with the kit #TPMS-TRAILER you referenced, being used for boat trailer applications. While they did say that the sensors can be submerged, they did recommend not…

view full answer...

Answer 7

Tireminder makes a TPMS setup for single axle trailers like yours with the part #TPMS-TRL-2 which comes with just two sensors like you'd only need, or if you preferred the kit that comes with 4 sensors that would work as well part #TPMS-TRAILER.…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

No, it does not but I have one that does. It is the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box item #GY86GR. This pin box is custom designed for the Lippert Rhino bolt pattern. It has an identical 21,000 lbs towing capacity and a 3,500 lbs tongue…

view full answer...

Answer 11

We have the following Gen-Y shock absorbing 5th wheel pin boxes which are compatible with the Lippert Rhino pin box bolt pattern. The weights listed below are the maximum capacities the pin box is capable of supporting. 21,000 lbs - 3.5K TW #GY86GR…

view full answer...

Can TireMinder TPMS for Dual Axle Trailers # TPMS-TRAILER be Used on Steel Valve Stems

Product Page this Question was Asked From

Continue Researching