Recommendedation for a Trailer WIring Harness for a 2009 Dodge Caravan

Question:

what color is the wire for tail, parkon a 2009 caravan? do i have to access both sides for rt. lt. trailer

asked by: jesse

Expert Reply:

I do not have any specific wire color information on that particular vehicle. To locate which wire carries the signal for the tail/running lights, remove the taillight assembly as if you were replacing a burned out bulb. Have a helper turn on the headlights, then probe the wires running to the assembly with a circuit tester such as our part # 40376, until you find the wire that shows current.

For this vehicle, we offer a T-1 Vehicle Wiring Harness, part # 118552. To install this converter, you will need to access the rear of the tail light assembly on both the drivers and passenger side of the vehicle. This harness is pretty simple to install, it would plug in behind the tail light assemblies with one wire ran to the vehicle battery. No hunting, cutting or splicing required. This unit has a tail light converter, which is required on your vehicle to make the trailer lighting work correctly.

expert reply by: Mike L