Is There a Replacement Tarp Available for an Extang Trifecta Cover on a 2018 Ford F-150 w/ 5.5 Bed

Question

Question:

i need a replacement tarp for my extang trifecta cover. i only need the tarp i cant find any product numbers.but here are 3 pix that i took

asked by: John G

0

Expert Reply:

Without having the model number for the Extang cover there is no sure fire way to find the correct replacement tarp. Often times on the Extang covers the numbers are located on the driver's side front rail (potentially underneath the tarp on the rail). If you could locate this number or provide me with pictures I may be able to assist you further.

Currently we have (3) Extang Trifecta covers as confirmed fits for your 2018 Ford F-150 w/ 5.5' bed.

-The Extang Trifecta Signature 2.0 Soft Tonneau Cover (Canvas) # EX94475
-The Extang Trifecta ALX Soft Tonneau Bed Cover (Vinyl) # EX59AR
-The Extang Trifecta 2.0 Soft Tonneau Cover (Vinyl) # EX92475 this cover currently has a replacement tarp already available. The Replacement Tarp for Extang Trifecta 2.0 Soft Tonneau Cover # EX92475-20.

If one of these covers looks like the correct cover or you can provide further information then please reach back out to me and I would be happy to help your further.

expert reply by: Scott S

0

Extang Patent label
(click to enlarge)

View 1 of a Extang Trifecta Cover
(click to enlarge)

Close up view of an Extang Trifecta Cover
(click to enlarge)

John G.

12/7/2021

i need a replacement tarp for my extang trifecta cover. i only need the tarp i cant find any product numbers.but here are 3 pix that i took

Reply

Scott S.

12/7/2021

I contacted the manufacturer regarding this question and included the pictures you were able to provide me. From the vehicle information and pictures, the manufacturer was able to tell me that the Replacement Extang Trifecta Truck Bed Tonneau Cover EX43475B is the correct replacement tarp (tarp only) for your cover.

Reply

Answer 1

The Replacement Tarp #EX92475-20 fits the Extang Trifecta 2.0 Soft Tonneau Cover #EX92475 for a 5-1/2' bed on your 2018 Ford F-150.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hey Michael, thanks for reaching out! The Timbren Active Off-Road Bumpstops #T28GR you installed on your 2018 Ford F-150 unfortunately have that reputation among users (although Timbren claims their systems provide a smooth ride). Because of this we…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 11

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 12

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...