How Do I Know Which Hub And Bearing Will Fit My Logan Enclosed Motorcycle Trailer
Question:
I have a Logan enclosed motorcycle trailer. Build around 2003. I need to replace the four hubs/bearings on the trailer but have a hard time locating the correct part on your web site. Could you provide me with the part numbers for the hubs and/or bearings? Regards
asked by: Roland B
Helpful Expert Reply:
To find the correct bearings for your Logan enclosed motorcycle trailer, you will have two options.
First, and by far the easiest, will be to contact Logan with your trailer's VIN. They should be able to tell you exactly which axle, hubs, and bearings were used on your specific trailer as this is information that is kept. However, if for some reason they cannot, you do have one other option.
If this is the case, you will need to remove one of the hubs to gain access to the bearings. Both the inner and outer bearings will have numbers on them that will tell you what they are, but these can be very hard to read and do wear off over time. If you can't make out what they are, you can also measure the inside diameter to confirm them. This will need to be done with calipers as the measurement needs to be very exact. As an example, the # L44649 bearing has a 1.063" inner diameter and an # L44643 bearing has a 1" inner diameter. So precision pays off.
Once you have this, the last thing you will need to do is determine the bolt pattern for the wheels. This is easily done by measuring from the center of one lug bolt to the center of the lug bolt right next to it. I included an article that will should what you have with each measurement as well.
If you can get me the bearing numbers and your bolt pattern, I can definitely find the correct hubs for you.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
etrailer Rubber Hitch Cover for 2" Trailer Hitches - Qty 1
- Hitch Covers
- Misc Covers
- Plain
- Rubber
- Fits 2 Inch Hitch
- Standard
- Square
- etrailer
more information >
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Curt Hitch that Fits 2023 Toyota Crown Hybrid
- Article: Rooftop Cargo Carriers
- Article: Best Bike Racks for Electric Bikes
- Q&A: Recommended etrailer Hitch for a 2023 Subaru Outback Wilderness
- Article: Trailer Wiring Diagrams
- Q&A: What Hitch Do You Recommend for a 2024 Toyota RAV4?
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Difference Between Curt & etrailer Trailer Hitches For 2024 Subaru Crosstrek Wilderness
- Q&A: Recommended Hitch for a 2024 Honda CR-V Hybrid