Recommended Replacement Wet Bolts For 5th Wheel Suspension System
Question:
I have a grand design 5 th wheel with 18 month old factory installed SRE 3000 Suspension and three of the bolts have frozen grease zeros. Do you sell the individual bolts? One is the pivot bolt and the other two are the end bolts in the springs.
asked by: Mike A
Expert Reply:
I do have wet bolts that will match the ones needed for your MORryde SRE 3000 suspension system, but they technically will not be MORryde brand. If this is not an issue, you will need the Replacement Wet Shoulder Bolt # LC126238 and # LC126197. The # LC126238 will measure 2-5/16" long and will be the pivot bolts, and the # LC126197 will measure 3-3/8" long and is designed for the extra spacing with the heavier duty shackles on the springs. This will get you all squared away.
Products Referenced in This Question
Replacement Wet Shoulder Bolt - Equa-Flex Tandem Axle Suspension - 9/16" x 3-3/8" - Qty 1
- Trailer Suspension Parts
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 9/16 Inch Diameter
- 3-3/8 Inch Long
- Lippert
more information >
Replacement Wet Shoulder Bolt - Equa-Flex Tandem Axle Suspension - 9/16" x 2-5/16" - Qty 1
- Trailer Suspension Parts
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 9/16 Inch Diameter
- 2-7/8 Inch Long
- Lippert
more information >
Product Page this Question was Asked From
MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 6-1/2 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Can The MORryde Suspension Upgrade Kit MR46ZR Be Used With Lippert Road Armor Equalizers
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Will E-Z Flex System # K71-652-00 Replace Equalizers with 5-3/5 inch Bolt Hole Spacing on Winnebago
- Search Results: k71~652
- Search Results: dexter trailer leaf spring suspension
- Video: Dexter E-Z Flex Suspension Kit Review and Installation
- Video: Dexter E-Z Flex Heavy Duty Rubber Suspension System Installation
- Article: How to Measure a Trailer Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Video: Review of Lippert Components Trailer Leaf Spring Suspension - Spring Mounting Hardware - LC122487
- Video: Review of MORryde Trailer Leaf Spring Suspension - Spring Mounting Hardware - MR46ZR
- Video: MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation
- Shop: E-Z Flex Equalizers - Double-Eye Springs - Tandem Axle - 8,000 lbs - Qty 2
- Q&A: Is Lippert Wet Bolt 126238 Available For Grand Design Reflection
- Q&A: What is the Overall Length of the Bolts in the MORryde Wet Bolt Kit with 2-1/4 Inch Shackles
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer
- Q&A: Dexter E_Z Flex Equalizer Upgrade for a 2004 Gulf Stream Ameri-Lite Camper
- Q&A: Can Suspension Wet Bolts Be Used with Both Nylon and Bronze Bushings
- Shop: Replacement Wet Shoulder Bolt - Equa-Flex Tandem Axle Suspension - 9/16" x 2-5/16" - Qty 1
- Shop: Replacement Flange Nut for Dexter Trailer Suspension Kits
- Shop: Replacement 7/16"-20 Flange Nut - Qty 1
- Search Results: 126238
- Search Results: nut
- Search Results: hub bearing kit
- Search Results: hub bearings