Recommended Hitch That Does Not Require Bumper Cutting for 2022 Hyundai Palisade
Question:
Looking for a hitch for a 2022 Palisade. I have seen some where the bumper has to be cut. These all look similar. Does the bumper need to be cut in order to install these? I would like to avoid it. Thanks.
asked by: Eddy
Expert Reply:
None of the hitches available for your 2022 Hyundai Palisade require trimming of the bumper. They may, however, require a little trimming of an underbody panel. Out of those available, I recommend the etrailer Trailer Hitch Receiver # e95ZR.
This is a Class III hitch with a 2" receiver which will be great for any accessories or towing you might do. It has a maximum gross trailer weight of 5,000 lbs and maximum tongue weight of 750 lbs. It is also compatible with weight distribution. It features a matte black powder coat finish for added durability. This finish also helps hide dirt and dings better than a glossy finish.
If you plan on doing some towing, I recommend adding the Curt T-Connector Vehicle Wiring Harness # CU94FR. This will give you a 4-way connection to power your trailer's signal lights. For a ball mount, the etrailer Ball Mount Kit # 989900 is a great choice. This comes with a 1-7/8" and 2" ball, along with a ball mount bag to store everything in.
I have attached some installation and review videos that you can check out.
Products Referenced in This Question
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Hitch Receiver & Wiring For 2024 Hyundai Palisade
- Q&A: Trailer Hitch Receiver & Wiring For 2022 Jeep Grand Cherokee WL
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: What is the Best Hitch for a 2024 Hyundai Palisade?
- Q&A: Parts Needed to Add 7-Way to 2024 Hyundai Palisade Limited
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Q&A: Hitch Rattles Against Exhaust of 2019 GMC Terrain
- Q&A: Vehicle Squeaks After Trailer Hitch Install
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Tire Sizing