What Replacement Dexter Axle And Hub Do I Need
Question:
Have a Dexter s/n 212296228 DEX#2666066 would like a replacement one with hubs and no brakes
asked by: Jack
Expert Reply:
I am able to get you setup with something that will work for you. Based on my research and after speaking with a representative from Dexter I was able to get some information about your existing axle. The specs for your axle are as follows:
rated for 3,500 lbs
hub face length of 85"
4" drop spindle
spring center 70".
We do not offer a direct replacement for this axle. The Dexter axle that is closest to what you need is the Dexter Trailer Axle Beam w/ Idler Hubs - 4" Drop - E-Z Lube - 5 on 4-1/2 - 89" Long - 3.5K, part # 8327812-I. This axle has a slightly bigger hub face and it has a longer center to center measurement. I do have a solution for you. The Timbren Axle-Less Trailer Suspension System - 4" Drop Spindle Only - 3,500 lbs, part # ASR3500S04, is a spindle only configuration that is rated for 3,500 lbs. It has the 4" drop you need and you can pair them with the Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2, part # 84545UC1-EZ. This assembly comes with the inner and outer races and the bearings.
I have included product description links, an installation video,of the Timbren Axle-Less Trailer Suspension System, and a video review link below.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Drop - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Drop - 4 Inch
- Timbren
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam w/ Idler Hubs - 4" Drop - E-Z Lube - 5 on 4-1/2 - 89" Long - 3.5K
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- Drop - 4 Inch
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: What are Specs of Dexter Trailer Axle # 8327812-I
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Q&A: Best Parts to Upgrade a Harbor Freight Trailer
- Q&A: Dimensions Of Slipper Spring Width Of Dexter Leaf Spring # DX93QR
- Q&A: What Gauge Wire Is Required On a 7-Way Connector
- Q&A: Wire Gauge Recommended for a 7-Way Trailer Connector
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Should I Install an Axle Flip Kit While Changing Leaf Springs?
- Q&A: Testing a Vehicle Side 7-Way Trailer Connector for Proper Function
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)