Ladder Roller That is Compatible With Yakima HD Crossbars

Question

Question:

Are the Ladder Roller for Rhino-Rack compatible with Yakima HD crossbars?

asked by: John

0

Expert Reply:

You will need to use the Ladder Roller for Yakima HD Bar # Y01163 as the Rhino-Rack Ladder Roller # RR615 will only work with the Rhino-Rack Heavy Duty crossbars.

expert reply by: Bud M

0

Answer 1

I spoke with Yakima about the Yakima LockNLoad Platform Rack like part #Y05047-39 and they informed me that Rhino-Rack Pioneer Rack Accessories should work but this is not something they can test. I have attached a list of these accessories for you…

view full answer...

Answer 2

The Thule TracRac TracONE Truck Bed Ladder Rack #TH27000XT has bars which are 4" wide so in order to mount the Malone DownLoader Kayak Carrier with Tie-Downs #MPG114MD you will need the Truck Rack T-Slot Fit Kit for Malone Kayak Carriers…

view full answer...

Answer 3

The Rhino-Rack RLCP Leg Kit for OEM Fixed Mounting Points - Pad Mount - Qty 6 RLCP02 are not compatible with the Yakima Track System, however, I do have a fit. The Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks…

view full answer...

Answer 4

The Rhino-Rack Universal Pioneer Platform Rack for Crossbars #RR42115BF doesn't have a direct way to lock to any roof rack system but you can use the Rhino-Rack Cable Core Lockdown system, 47" Cable #RR43206 or 71" Cable #RR43207, which…

view full answer...

Answer 5

In order to install the Yakima HullyRoller Roof Rack Kayak Carrier part Y04035 on the roof of your 2015 Jeep Grand Cherokee using the the Thule AeroBlade Edge Roof Rack part #TH7602B-TH7602B, you will need to use the Universal MightyMounts for Yakima…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hi Alec, The Inno Kayak Roof Rack w/ Tie-Downs #INA452 needs a 28" minimum spread so that the saddles sit at the right spot for the kayak and support the weight properly. This is probably just a general guide from Inno though because the length…

view full answer...

Answer 12

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...