Recommended Replacement 5.2K Square 89" Trailer Axle
Question:
Hello! I need a trailer axle. My boat trailer has a 3x2 square single axle with a 3 . Spring center length 184 cm 72, hub facing length 89. Drum brake with LM67048, 25580 bearings. Spindle was damaged. I want to replace the axle with a straight square without lowering. 5200 lbs or more. Install it over the spring. Do you have such an axle? I found you have a 71 1/2 inch spring center axis. Will it fit? How do I change the spring mount so that the axle fits over it? K71-403-00 and CE23103 ? Thank You!
asked by: Andrey
Helpful Expert Reply:
I do have an option for you but we only offer round axles in the size you need, the Dexter Trailer Axle Beam part # 8327820 would be a great option. It matches the 89" spring center but you will need to cut and move the spring seats to your 72" requirement. I also recommend new seats for this as well, part # TRSS300. The axles can be flipped with a new u-bolt kit, the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles part # APUBR-9.
Products Referenced in This Question
U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts
- Trailer Suspension Parts
- U-Bolt Kits
- Camper
- Car Hauler
- Utility Trailer
- 5200 lbs - 7000 lbs
- Round Axle - 3 Inch
- 9/16 Inch Diameter
- 7-1/16 Inch Long
- Redline
more information >
Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
- Trailer Suspension Parts
- Spring Seats
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 3 Inch
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 89" Long - 6,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 6000 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Q&A: Can 3,500 lb Axle Trailer Leaf Spring 25-1/4 inch get Replaced with 5k Rated Spring
- Q&A: Correct Bearing Kit for 2019 Jayco North Point 315RLTS
- Article: How to Measure a Trailer Axle
- Q&A: Availability of 5,200 lb Axle With Idler Hubs
- Q&A: How to Determine Correct Replacement Spindle Based on Measurements
- Q&A: Comparing the E-Z Lube Hubs to the Standard Hub Assemblies for Trailer Axles
- Article: Most Popular Wheel Bearings
- Q&A: Can The Inner Bearing L68149 Be Used In Place Of The 25580 In The 8-213-5UC1 Hub
- Article: Testing Breakaway Systems
- Q&A: Replacement Axle Needed for Dexter Axle Mobile Home Axle
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Article: Trailer Wiring Diagrams