Replacement Hardware Mounting Kit For A BAK MX4 Hard Tonneau Cover On A 2017 F-150 5.5' Bed

Question

Question:

Hi, Im looking for a complete parts kit for my MX4 hard folding bed cover. Basically everything but the actual bed cover thats needed for the installation. I have a 2017 F-150 with a 5.5 ft bed. I was wondering if this kit on your website was the correct one. If so, does this kit have everything needed for the installation, and would the parts carry over to any BakFlip folding bed cover? Replacement Mounting Hardware Kit for BAKFlip MX4 Hard Tonneau Cover Item # BAKBK-400KIT Much help would be appreciated! Thanks,

asked by: Tyler

0

Expert Reply:

I spoke with the manufacturer, BAK Industries, and the correct kit for your BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish # BAK48329 is the Replacement Mounting Hardware Kit for BAKFlip G2 Hard Tonneau Cover # BAKBK-200KIT. This will come with all the items needed to mount the cover to your 2017 Ford F-150 5.5' bed.

expert reply by: Kevin C

0

Answer 1

I called BAK industries to see if they had weight specifications for their tonneau covers. Unfortunately, they do not record these, but there is something that I can offer that might help. The BAKFlip F1, part #BAK72329, and the MX4, part…

view full answer...

Answer 2

The Pace Edwards SwitchBlade #311-SWC95A17 that you referenced has a pinch latch that you use to open in the middle of the cover (see attached picture). When you close it all of the way and then close your tailgate the only way to open the cover is…

view full answer...

Answer 3

Since the BakFlip MX4 you'd have on your 2015 GMC Sierra 1500 5-1/2 foot bed is the part #BAK48120 the correct replacement rail kit you'd need is the part #BAKRAILS-48120 and you'd be set. Then the correct hardware kit…

view full answer...

Answer 4

The TrailSeal Tailgate Gasket, item #834532001583, is 114 inches long 1-1/8 inches wide, and 5/8 inches thick. This seal is made of 1 continuous piece that covers the gap from one side of the truck to the other.

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Pace Edwards has two confirmed fitting Switchblade covers for your 2024 Chevy Silverado 3500 DRW 8' bed; part #PE87CV, which is an aluminum and vinyl mix and part #PE77CV, which is just aluminum.

view full answer...

Answer 10

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 11

The highest capacity fifth wheel hitch we have that fits your 2024 Chevy Silverado 3500 that has the OEM pucks is the Demco part #DM47GV which has a trailer towing capacity of 31,000 lbs. It also has a nicer jaw design which allows it to provide a…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Hardware Mounting Kit For A BAK MX4 Hard Tonneau Cover On A 2017 F-150 5.5' Bed

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching