1970'S Coleman Versa Trailer Replacement Axle Due to Obsolete Hub and Spindle
Question:
Hi.. Im looking for 1970s Colemen Versa Trailer Wheel HUBs, No one can get the old wheels off. the wheel bearing part numbers are: L44649R and LM11949. Appears to be a 1.06 in by 0.75 in tapered spindle. Do you have anything that might fit? If so will also be needing wheels/tires. Thanks
asked by: Greg
Expert Reply:
My recommendation for your 1970's Coleman Versa Trailer is to change the axle as your hubs and spindles are going to be obsolete. As there is very little information that I can find on your axle under your Versa I will need you to provide the measurements for both the spring center to spring center and hub face to hub face that you have on your axle. This will help me to ensure that we have a replacement axle that will fit your Trailer.
We do have a more universal option that would use the Timbren Axle-Less Trailer Suspension System # A12RS440 to replace your current leaf sprung axle. The Timbren system comes with the correct hubs that will fit the Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel # AM30000 that matches the size wheels and tires that came on your Versa.
Products Referenced in This Question
Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 4 on 4 - 1,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 1200 lbs
- 4 on 4 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range B
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range B
- 4.80/4.00-8
- 8 Inch
- K - 65 mph
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: How to Measure a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Tire Sizing
- Q&A: Will The In Bed 7-Way Fit On a 2023 Ford F-150 With In Bed Power Outlet?
- Article: Trailer Wiring Diagrams
- Article: Car Camping Checklist
- Q&A: Repair Kit Availability for a 5125 Valley Coupler
- Q&A: Weight of Superwinch S7500 Trailer Winch
- Q&A: Replacement Hub for Old Boat Trailer with 07100 Bearing
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Do Other Wires Need to be Installed on 2023 Honda CR-V With Curt 4-Way C56370
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes