Will I have to Reduce the Weight Capacity on My Receiver If using an Extended Ball Mount?
Question:
If my ball mount length is 2 inches longer than the OEM mount, does that reduce my allowable tongue weight due to the lever effect?
asked by: Ken M
Helpful Expert Reply:
Using a ball mount like the Brophy # BH20 that is 13-1/4" long compared to a more standard Curt # D-4 that is 10-1/4" long, will not reduce the maximum tongue weight allowed on your receiver. It is important to be sure to not exceed the weight ratings on either your receiver, the ball mount or the hitch ball. As all 3 of these will have their own maximum weight ratings be sure to never exceed the lowest rating of all the components.
You will only need to look at reducing weight when you look at adapters as those will add a significant amount of distance and increase the lever effect past what the manufacturer tests the receiver for.
Products Referenced in This Question
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Product Page this Question was Asked From
Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Long Shank
- Brophy
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Difference Between Brophy # BM20 and # BH20 Ball Mounts
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Is Spacing Around BullRing Tie-Downs in Stake Pocket Okay for a 2015 Ford F-350
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Hitch Extender for 10,000 lb Travel Trailer Compatibility
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Trailer Hitch Receiver Sizes
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Dimensions for Buyers Product Wiring Junction Box # 3375601101
- Q&A: Longer Ball Mount Recommendation With at Least 750 lb Tongue Weight Capacity
- Q&A: Is Trimming Required to Insall the etrailer Hitch e45ZR on a 2024 Kia Telluride?
- Q&A: How To Determine The Correct Hitch Extender For Towing A Boat Trailer With A Truck Bed Camper
- Article: Stability Control for Heavy Duty Vehicles