Parts Needed To Flat Tow a 2021 Jeep Wrangler Sahara With Stock Bumpers  

Question:

Expert Reply:

For your 2021 Jeep Wrangler Sahara first you will need to start with the Base Plates # RM-521453-5. These will act as a connection point for the Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522 to connect on the front of the Jeep. These tow bars allow for greater maneuverability and make attaching and disconnecting your Jeep much easier.

The RoadMaster Falcon All-Terrain Combo Towing Kit # RM-9243-1 provides you with the electrical components that you need to connect the Jeep tail lights as well as the locks, bags and safety cables needed for the bars. If your Jeep is equipped with the rear proximity sensors you may need the Smart Diodes for Variable Voltage LED Tail Lights # RM47ZR to replace the standard diodes that come with the towing kit.

I do recommend using a Demco SBS Stay-IN-Play DUO Supplemental Braking System # SM99251 to operate the brakes on your Jeep when you use the brakes in your Class C motorhome. This system gets mounted under the hood of your jeep and is always ready when you need to tow. Once you have your Jeep connected you only need to flip the switch to activate the Stay-In-Play inside your Jeep.

Once you have the base plates installed on the front of your Jeep you will want to confirm the height to the center of the mounts with the center height of the receiver on your motorhome. The bars will want to be within 3" vertically for them to operate correctly without becoming damaged. If you are farther than 3" you will need a High-Low Adapter like the Roadmaster # RM-048-4. This particular adapter will raise or lower the bars 4" to help you level the tow bars. If you need help selecting the correct adapter for your specific Jeep please let me know what measurements you find for your Jeep and the Motorhome receiver.

expert reply by: Bud M

0