Replacement Carriage Bolt for the Arms of the Thule Spare Me Bike Rack

Question

Question:

I have a thule bike rack and have lost the bolt and arm numerous times from the vibration of the car when driving. Anyway, I need to order the 8mm I think bolt for the arm knob for the thule spare me bike carrier. the bolt screws into the arm knob. I found a bolt at home depot, but it was shorter and thinner than the original. Thanks

asked by: Carol

0

Expert Reply:

The bolt that you are looking for is the Replacement Mounting Carriage Bolt, # 915-0880-11. This is an M8 x 80mm bolt that works with the arm knob on the Thule Spare Me bike rack to secure the arms to the body of the bike rack.

expert reply by: John H

0

Answer 1

This Replacement Arm Knob for Thule Spare Me Bike Carrier #753-0737-10 that you referenced is threaded, so basically it is the nut. Yes, we do carry the Replacement Mounting Carriage Bolt #915-0880-11.

view full answer...

Answer 2

It sounds like you are looking for the replacement bolt for the Thule Spare Me bike rack part #TH963PRO, which would be the part #915-0880-11. The replacement mounting plate would be part #753-3532.

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 5

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching…

view full answer...

Answer 6

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 7

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 8

The Bargman 7-Way, RV-Style Connector #WG54006-043 referenced in your question uses the standard RV-style pin locations for its 7-Way connector. I have attached a diagram of these locations and their functions for you to check out. Wire colors will…

view full answer...

Answer 9

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 10

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Answer 11

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

view full answer...

Answer 12

A cover being installed on your spare tire would not prevent the Swagman Bike Rack part #S80501 from installing. The rack would still fit and work well. You might still compare the dimensions in the picture I attached with you spare tire so that you…

view full answer...

Replacement Carriage Bolt for the Arms of the Thule Spare Me Bike Rack

Product Page this Question was Asked From

Continue Researching