Storage Cover Recommendation for 10 Foot Cargo Trailer

Question

Question:

cargo trailer cover for a 10ft ca series flat top cargo 7x10 v nose single axle

asked by: John L

0

Expert Reply:

The Adco SFS AquaShed Cover # 290-46002 is exactly what you're needing for your 10' cargo trailer. Attached is a review video for you to check out. On shorter trailers this can be stretched over the tongue, but it should fit right over the box on your trailer just fine.

expert reply by: Jon G

0

Answer 1

Though there isn't anything specifically for a 6 x 10 v-nose enclosed trailer, we have something that may work for you. Since the v-nose extends the length somewhat, a cover for a bumper-pull horse trailer up to 12 feet could work, depending on…

view full answer...

Answer 2

For your utility trailer, there aren't specific covers made, however you can use a travel trailer cover for your application. I recommend the Adco Olefin HD RV Cover for Travel Trailers up to 18' - All Climate + Wind - Gray #AD37ZR or the…

view full answer...

Answer 3

We have RV storage covers for all types of trailers but in a 12-foot length your best bet may be a horse trailer cover like Adco #290-46002 which fits trailer up to 12-feet, or for an easier fit the cover #290-46003 which fits trailers up to 14-feet.…

view full answer...

Answer 4

The Adco SFS AquaShed Cover for Bumper Pull Horse Trailer - 12' Long #290-46002 will work well with the V-nose Cargo trailer in your photo as long as it is between 10 feet 1 inch and 12 feet long. If your trailer is 12 feet 1 inch to 14 feet…

view full answer...

Answer 5

There aren't covers designed for enclosed utility trailers but there are some that could still work. You could likely use a pop-up cover such as #290-12293. It is 168 inches long, 85 inches wide and 54 inches tall. It may be longer than needed…

view full answer...

Answer 6

The Adco SFS AquaShed Cover for Bumper Pull Trailer part #290-46004 would be an excellent option for a 7 x 14 V-Nose Enclosed Trailer. The Adco SFS AquaShed Cover for Bumper Pull Trailers is actually designed for horse trailers but it will work well…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

The Adco SFS AquaShed Cover for Bumper Pull Trailer - Up to 16' Long - Gray #290-46004 would work for your 7' x 16' enclosed trailer, but there is a chance that it doesn't completely cover the bottom of the wheels and tires since it…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Storage Cover Recommendation for 10 Foot Cargo Trailer

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching