Replacement Bearing Kit for 84545 Hub
Question:
Hub on my trailer number is 84545 what bearings do i neef what tupe of axle
asked by: Jason
Helpful Expert Reply:
Your hub fits a 3,500 lb axle, like part # 84545UC1-EZ or part # 84545BX, so you're going to need the Bearing Kit for an #84 Spindle # BK2-100. This comes with all of the bearings, races, and seal that you'll need for 1 hub. We do recommend doing the same thing to both sides of your axle so it would be good to replace the bearings and such on at least the hubs of the same axle (if you have more than one axle on your trailer).
Attached is an installation video for the bearing kit for you to check out.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: How to Read the Lippert Components Axle Description Measurements
- Q&A: Trailer Grease Seal to Replace 127194TB
- Q&A: Recommended Replacement Grease Seal for 2014 Shorelander Boat Trailer
- Article: Trailer Wiring Diagrams
- Article: How to Charge a Dump Trailer Battery
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Maintenance Schedule
- Article: Most Popular Wheel Bearings
- Q&A: Should I Buy a Horse Trailer with Torsion Axles or Straight Axles with Leaf Springs
- Q&A: Raising Trailer with Welded On Torsion Axles
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Distance From Hitch Pin Hole to Gusset on Curt Ball Mount C45112
- Article: Roadmaster Vehicle Specific Base Plates