Does the Westin MAX Winch Mounting Tray # 46-23555 Come with All Hardware Included?

Question

Question:

does all the equipment come with this 46-23555 to hook it up or is it seperate?

asked by: Bobby H

0

Expert Reply:

If you are just talking about the installation hardware, yes - all of the mounting hardware is included in the Westin MAX Winch Mounting Tray # 46-23555 for your 2018 Ram 2500. However, you will need additional tools for the installation. Here are the tools you need for the install:

- 14mm socket
- 15mm socket
- swivel socket
- extensions
- 16mm socket
- 16mm wrench
- 18mm socket
- 18mm wrench
- ratchet
- torque wrench

With these tools, you will be able to complete the installation. If you are wanting to add an additional bull bar # 46-43555, dress tray # 46-70100, or tow hook # 46-3005, those are additional parts you will need to purchase.

expert reply by: Bob C

0

Answer 1

I attached a picture that shows the Westin MAX Winch Mounting Tray #46-23555 but in chrome mounted on a similar Ram truck as yours for you to check out.

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

The Replacement Hardware Kit #AABRKT-5056 will fit the Aries Pro Series Grille Guard #AAP5056. This is the upgraded version of the Grille Guard #AA5056 which uses the same install hardware to attach to a truck.

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 6

Hey Jeff, The Pace Edwards JackRabbit Retractable Hard Tonneau Cover w Explorer Rails #311-JED7833 is designed for a 6-1/2' bed while the #311-KRD7936 is designed for an 8' bed. Since you have a 6-1/2' bed the #311-JED7833 would be the…

view full answer...

Answer 7

Installing ta Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box like the #325-GH-8045 would not void the warranty of your camper, and Gen-Y makes some of the most durable parts on the market. I really like this as an alternative to…

view full answer...

Answer 8

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...